The take-off for a standard radius 90 is one and one half the diameter of the pipe. Example: 6 inch 90 has a take- off of 9 inches.
The take-off for short radius 90 would be the dia. of the pipe. Long radius 90 is 2 times the pipe diameter.
12
12
12
6 inch or 4 inch if it's a short radius
2 inches
unit of measurement. Look at ruler and take an inch and divide by 4 equal parts. Each has a mark, one of those is 1/4 (quarter) 2 a half (1/2), 3 is 3/4 and 4 makes 1 whole inch. Just like a quarter (money) is one fourth of a dollar (whole)
110 of them.
Take a inch and divide it into 3parts
11 1/4
90 degree angle rolled on a 45
this app help you: "Miter Flat Pattern Design" in play.google.com
what size and style? If it is butt weld you half the pipe size 3 times and take the 2nd and 4th number and add together. 6 inch example below....1] 6"2] 3" add this3] 1 1/2"4] 3/4" and this................so 6 inch 45 would be 3 3/4"you also can use this formula.. pipe size times 0.625 [ 5/8 ]
It is the measurement of fittings for piping. It is the measurement of fittings for piping.
The take off formula of a 45 degree elbow pipe, will depend on what the pipe is on. Sometimes a 45 degree pipe will need a 90 degree right angle turn to come off.
Three inches
4 5/16
The same as a short radius 90 of that same pipe size. I Rule of thumb, for example: 1/2 inch copper tubing you would take off 1/2 inch, likewise 3/4 tubing take 3/4 inch. Your question is 'pipe' are you actually using pipe, cutting and threading pipe? I am often asked questions and find that people are not using 'pipe'. Copper tubing, pvc, cpvc, dwv are quite forgiving when it comes to a slight miscut. Iron and galvanized piping is a different story, get it right the first time!
Short Radius 90 degree elbows are the same as pipe size.... Long Radius 90's are pipe size times 1.5.... so a 6" (SR) elbow is 6"... a 6" (LR) elbow would be 9"
1/2 inch
What it's the take out off 12 inch 90