answersLogoWhite

0


Best Answer

Use a wire table to find the cross-section area of #33 wire, multiply by 7, then find the AWG for that cross-section.

User Avatar

Wiki User

9y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What is the AWG of 7 strands of AWG 33 wire?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What does 7 29 wire mean?

7 strands of 29 gauge (AWG) wire


What is meant by 737 40 SWG cu flexible wire.?

The description you show seems to match the description for 16AWG wire made up of 259 strands of 40AWG, Rope construction with bunch stranded groups. Similar to concentric for the groups of strands. The wire is made up of 7 Bunches of 37 strands of 40AWG strands to make a 16AWG wire. The description should be 16AWG(259/40) construction is 7x37/40. The SWG more than likely stands for Standard Wire Gauge. This construction is a high strand count which would make it flexible. You can learn more about stranding and view a wire gauge chart on the link below.


How much current can be carried on AWG-2 wire?

From what i can tell with the National Electrical Code the smallest wire listed is 18 AWG that is listed at 7 amps and 5.6 for continuous loads which is running for more then 3 hours at a time so i would rate a 20 AWG at about 5 amps MAX and 2.5 for continuous but good luck with that


What are the usual number of strands in an electrical cable?

there are seven (7) strands


Can you wire a 120 volt 7 amp Jacuzzi motor to a wall outlet in my bathroom?

No, it must be on a dedicated circuit of it's own. It must be on AWG 12/2 wire with 20 amp breaker. It also must be protected with a GFCI outlet.


Convert 350 mcm to AWG?

There is no defined AWG for 350 MCM. The American Wire Gauge stops at 0000 (4/0), and 350 MCM is bigger than this. An approximate conversion would be 6/0, if there were such a thing. Extrapolating out from 4/0, 6/0 is 334.8 MCM, and 7/0 is 422.2 MCM. These wire sizes don't exist of course, and don't exactly match 350 MCM anyway.


How much copper by weight is in one 50ft 20 amp extension cord?

depends on the wire gauge and strand type sold strand 12 AWG wire is 50.57 feet per pound. most extension cords however are not solid strand, they are multistrand line which allows for flexibility and breakage. standard size is 28 AWG, 2067 feet per pound. 7 strand 12-3 line gives you 1050 feet of 28 AWG or ~$2 worth of copper if its clean and bare, less if it still in its insulator or if the insulator is burned off.


What is 33 percent of 7 dollars?

33% of 7= 33% * 7= 0.33 * 7= 2.31


What size wire for 110 feet of 220 volt wire to a 30 amp planer?

The length of run and voltage are irrelevant, rating of the cable and where/how it is installed are what matter.30A cable is 6mm2A #3 AWG copper conductor will limit the voltage drop to 3% or less when supplying 30 amps for 200 feet on a 110 volt system.


− 33 − ( − 7 )?

7 is 21.21% of 33.


What is 33 7 in simplest form?

33/7 is in its simplest form.


What percent of 33 is 7?

7 is 21.21% of 33.