0
40 amp
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
What is the wire size for a 35 amp breaker to a ac unit?
You will need to use #8 wire.
What size wire do you need for 42 amp circuit?
8 AWG copper.
Can a 40 amp breaker not a 4 amp breaker be used to replace a 35 amp breaker for ac unit?
Depends on the size of the wire going to the A/C. If the wire is AWG #10 you cannot install a 40 amp breaker. If the wire is AWG #8 you can.
What size wire and breaker do you need for a 5000 watt garage heater?
Look on the heater and see what amps it is pulling. That will determine the wire size and breaker size. It must be on a dedicated circuit. 15 amps = AWG # 14 wire with 15 amp breaker 20 amps = AWG # 12 wire with 20 amp breaker 30 amps = AWG # 10 wire with 30 amp breaker 40 amps = AWG # 8 wire with 40 amp breaker
What size wire for 28 amps?
Minimum size is 10 gauge with a 30 amp breaker. To be safe I would install an 8 gauge with a 40 amp breaker.
What size wire for 40 amp?
AWG # 8 copper.
What wire size will carry a 40 amp load?
AWG # 8
What is the wire size for a 35 amp breaker to a ac unit?
You will need to use #8 wire.
What size wire in a 40 amp 12 volt circuit?
Use 8 gauge wire.
What size ground wire for 100a service?
A 100 amp residential service requires a size #8 copper wire, it should be insulated in green.
What size wire do you need for a forty amp breaker?
8 AWG is typical.
What size wire do you need for 42 amp circuit?
8 AWG copper.
Can a 40 amp breaker not a 4 amp breaker be used to replace a 35 amp breaker for ac unit?
Depends on the size of the wire going to the A/C. If the wire is AWG #10 you cannot install a 40 amp breaker. If the wire is AWG #8 you can.
What size wire for a 40 amp breaker to a welder?
A #8 aluminium wire with an insulation factor of 90 degrees C is rated at 45 amps.
What size wire and breaker do you need for a 5000 watt garage heater?
Look on the heater and see what amps it is pulling. That will determine the wire size and breaker size. It must be on a dedicated circuit. 15 amps = AWG # 14 wire with 15 amp breaker 20 amps = AWG # 12 wire with 20 amp breaker 30 amps = AWG # 10 wire with 30 amp breaker 40 amps = AWG # 8 wire with 40 amp breaker
How do you choose the right fuse for the job?
The correct size fuse needed is based on the size wire used in the circuit. The size wire needed is based on the load that will be applied to the circuit. 1. AWG 14/2 wire = 15 amp fuse 2. AWG 12/2 wire = 20 amp fuse 3. AWG 10/2 wire = 30 amp fuse 4. AWG 8/2 wire = 40 amp fuse
What size wire for 28 amps?
Minimum size is 10 gauge with a 30 amp breaker. To be safe I would install an 8 gauge with a 40 amp breaker.
