Best Answer

Standard block is basically 8" x 16" which is 128 square inches 128/144=0.8888888888888889. The size of the mortar joints will also have a bearing on the overall wall size.

Q: What is the area of a cinder block in square feet?

Write your answer...

Submit

Still have questions?

Continue Learning about Engineering

It depends on the thickness and the density. One ton should be about 15 cubic feet when compacted, so it would cover 30 square feet 6 inches thick or 45 square feet 4 inches thick or 60 square feet 3 inches thick. It would make a driveway four inches thick, 9 feet wide and 5 feet long or a footpath 3 inches thick, three feet wide and 20 feet long.

1742.40 Square Feet = 1 Gunta 1 Acre= 25 Guntas 1 Gunta = 4 Cents (Decmil) 43560 Sq. Ft. = 1 Acre

1 TON of air conditioning requires 400 cubic feet per minute of air movement in the average HVAC system.

Premixed concrete and cement is usually ordered in quantities referred to as yards. A yard is basically a cubic yard of volume, a three dimensional square box that is 3' x 3' x 3', or 27 square feet. If an area to be poured requires the coverage of 27 square feet with a thickness of 4", then the amount of concrete required would be 1/3 yard.

square foot/feet

Related questions

A 16 foot by 16 foot block has an area of 256 square feet. It would require 4.836 16 foot by 16 foot blocks to cover an area of 1238 square feet.

Feet is a unit used to measure length. Square feet is a unit used to measure area. A block 1 ft x 1 ft has an area of 1 square foot.

An acre is 43560 square feet. This is a square parcel of land 208.71 feet on each side. A standard city block measurement was established at 6 city blocks = 1 kilometer. So 1 city block = 546.80665 feet. So an area approximately equal to 4 square acres = one square city block. This would be one half city block wide and one half city block long to approximately equal 209 feet wide and 209 feet long. This is approximate.

A block that is 3 feet x 3 feet x 6 feet has a surface area of 90 square feet. (and a volume of 54 cubic feet)

Area is not expressed in feet. You can express area in square units, such as square kilometers, square meters, square miles, or square feet.

a square block would be 264 x 1056 = 278,784 square feet, which is equal to 6.4 acres.

The area is 26250 square feet or 2916.67 Square yards.

The area is 256 square feet.

The area is 80 square feet.

8 square feet is the area.

The area is 225 square feet!

The area of a square with a perimeter of 22.33 feet is: 31.16 square feet.