0
What else can I help you with?
If a bucket holds 512 liters and a jug holds 500 milliliters how many full jugs of water will be needed to fill the bucket?
its simply 512/ 0.5 which equals 1024
How many round point shovels of sand to fill a 5 gallon bucket?
To fill a 5-gallon bucket with sand, you'll need approximately 0.67 cubic feet of sand, as a 5-gallon bucket holds about 0.67 cubic feet. A round point shovel typically holds around 0.1 to 0.2 cubic feet of sand per scoop, depending on the size of the shovel and how tightly the sand is packed. Therefore, it would take about 3 to 7 shovel scoops to fill the bucket, depending on the shovel's capacity.
Andrew has an empty bucket which holds 3.8l of water he fills it up using a jug which holds 0.4l of water how many jugs will he need to fill up the bucket?
The answers is only one jug, or ten jugs depending on how you look at the question.
How many buckets of water are needed to fill a tub?
The number of buckets needed to fill a tub depends on the size of both the tub and the buckets. For example, if a standard bathtub holds about 40 gallons of water and a typical bucket holds 5 gallons, you would need approximately 8 buckets to fill the tub. However, this can vary based on the specific dimensions of the tub and bucket used.
If you have a bucket that holds 4 gallons of water and a second bucket that holds 7 gallons of water. The buckets have no markings can you go to the well and bring back exactly 5 gallons of water?
Yes, you can measure exactly 5 gallons using the two buckets. First, fill the 7-gallon bucket completely. Then, pour water from the 7-gallon bucket into the 4-gallon bucket until the smaller bucket is full; this will leave you with 3 gallons in the 7-gallon bucket. Next, empty the 4-gallon bucket and pour the 3 gallons from the 7-gallon bucket into it. Finally, fill the 7-gallon bucket again and pour into the 4-gallon bucket until it is full, which will leave you with exactly 5 gallons in the 7-gallon bucket.
How do you get exactly 2L if you have a 4L and 5L bucket?
Fill the 4 litre bucket and pour it into the 5 litre. Re-fill the 4 litre bucket and pour again. That gives you 5 litres (and 3 litres left in the smaller bucket). Empty the 5 litre bucket and put the remaining contents from the 4 litre into it. fill the 4 litre again - and pour it into the 5 litre bucket until it's full. Since you can only add 2 litres to the existing 3 litres, what you have left in the smaller bucket is... 2 litres !
How do you precisely measure 5 liters of water if you only have one 3 liter bucket and one 7 liter bucket with a steady flow of water?
1. fill up the 7 litre bucket. 2. from the 7 Litre bucket, fill up the 3 lt. bucket, so now you have 3 and 4. 3. throw away the 3 litres you´ve got, then from the 7 litre bucket, (where you have four litres of water left) pour 3 into the 3 litre bucket. Now you have 3 and 1. 4. throw away the 3 litres again, and pour the 1 litre left in the 7 litre bucket into the 3 litre bucket. Now you have 1 and 0. 5. fill up the 7 litre bucket, then from it, pour 2 litres into the one that had 1 litre. Now you have 3 and 5. 6. finally, throw away the 3 litres and there you have 5 litres left.
If I have a bucket of water that holds 4 gallons of water and another bucket that holds 7 gallons of water. The buckets have no markings. How can I go to the well and bring back exactly 5 gallons?
Fill the 4 gal bucket and empty it into the 7 gal bucket. Fill the 4 gal bucket and then fill the 7 gal bucket from the 4 gal. This leaves 1 Gallon in the 4 gallon bucket. Empty the 7 gallon bucket and pour the gallon from the 4 gal lbucket into it. Fill the 4 gal bucket and pour it into the 7 gal bucket. You then have 5 gallons in the 7 gallon bucket.
If a bucket holds 512 liters and a jug holds 500 milliliters how many full jugs of water will be needed to fill the bucket?
its simply 512/ 0.5 which equals 1024
How will you measure 5 liter water if you only have 2 liter bucket and 4 liter bucket?
There are two easy ways to do these with these resources: The first one is to simply fill the two litre bucket half full and fill the four litre bucket to the brim and then, all together, in both buckets you have five litres: Voila The second one is slightly more complex you fill the four litre bucket three quatre full and then fill the other bucket to the brim: Voila As well as these there are many more more complex answers to this questions
The number of times a bucket of capacity 4 litres to be used to fill up a tank is less than the number of times another bucket of?
x/4-x/3=4 x=48 liters
How much coolant do you need to fill a Mitsubishi fto radiator?
the mitsibushi fto engine holds 6.5 litres of coolent.
A bag of sand weighs 56kg a bucket holds 2kg how many buckets of sand wll the bag fill?
10
How many round point shovels of sand to fill a 5 gallon bucket?
To fill a 5-gallon bucket with sand, you'll need approximately 0.67 cubic feet of sand, as a 5-gallon bucket holds about 0.67 cubic feet. A round point shovel typically holds around 0.1 to 0.2 cubic feet of sand per scoop, depending on the size of the shovel and how tightly the sand is packed. Therefore, it would take about 3 to 7 shovel scoops to fill the bucket, depending on the shovel's capacity.
How do you get the snow to the yellow puffleson clock repairs?
You have to get the bucket from the guy with the chair and fill it] You have to get the bucket from the guy with the chair and fill it] You have to get the bucket from the guy with the chair and fill it]
Andrew has an empty bucket which holds 3.8l of water he fills it up using a jug which holds 0.4l of water how many jugs will he need to fill up the bucket?
The answers is only one jug, or ten jugs depending on how you look at the question.
How many times could you fill a jug that holds 0.6 liters from a five liter container?
8 times (which is 4.8 litres)
