Use the following facts to convert metric to imperial:
LENGTH
5 miles ≈ 8 km
2.5 cm ≈ 1 inch
30 cm ≈ 1 ft
1 m ≈ 1 yd
AREA
1 hectare ≈ 2.5 acres
1 hectare ≈ 10 000 cm2
1 acre ≈ 4840 yd2
VOLUME (CAPACITY)
1 l ≈ 1.75 pints
4.5 l ≈ 1 gallon
MASS (WEIGHT)
1 kg ≈ 2.2 lbs
1 oz ≈ 28 g
1 tonne (metric) ≈ 1 ton (imperial)
ALSO USEFUL TO KNOW
1 lb = 16 oz
1 yd = 3 ft
1 ft = 12 inches
TAKE NOTE:
≈ this sign means 'approximately equal to'
---------------------------------------------------------------------------
best is to type in Google there are some online converters. other idea is check your cell phone it might have it and if that doesnt work write down exactly what do u want to convert from imperial to metric !
Divide by 25.4 for metric to imperial. Multiply by 25.4 for imperial to metric. Direct Conversion Formula7.64 mm* 1 in 25.4 mm = 0.3007874016 in
You rarely get a metric to imperial unit conversion that is not rounded off, but this is one of them. 1" = 2.54cm. Remember it. It is the only conversion that matters. It is not rounded off at all. One inch is exactly 2.54 centimeters. 98" * 2.54 = 248.92cm■
Imperial.
It depends on which measurement or unit you want to convert. Each and every different unit has its own conversion factor.
A tonne is a metric measurement.
Divide by 25.4 for metric to imperial. Multiply by 25.4 for imperial to metric. Direct Conversion Formula7.64 mm* 1 in 25.4 mm = 0.3007874016 in
The study of metric system and units are important as it give a simple conversion factors. Metric units always goes by the powers of 10 that the calculations becomes easier to deal with than imperial where the conversion factors differ by its units.
Scroll down to related links and look at "Conversion of units - Wikipedia".
It may be simple but imperialtometric.com will allow you to make conversions between imperial and metric units. You may want to invest in a proper conversion table to do this though if this is business related.
The problem with the English Imperial system is that there's a different conversion factor for every unit ... potentially 100 different numbers to answer your question. If you'll choose one, two, or three specific English Imperial units, we'll give you their conversion factors to/from metric units, although those numbers are easily found on line.
A gallon is certainly not metric. It is imperial.
Your question makes little sense. There are no specific metric subjects. Metric is a system of measurement as is Imperial. They are each readily converted to the other using the appropriate conversion factor.
Imperial and metric systems of measurement can be interpreted by a metric conversion table and chart. The measuring scheme is available from various online companies like French Property Company.
First, there is no "English". Second, there are hundreds on conversion factors between the near-obsolete (conventional) and metric systems. For mass alone, for example, there are conversions from grain to milligram, ounce to gram, pound to kilogram, stone to kilogram, hundredweight to kilogram, Imperial ton to metric ton. There are more that these.
You rarely get a metric to imperial unit conversion that is not rounded off, but this is one of them. 1" = 2.54cm. Remember it. It is the only conversion that matters. It is not rounded off at all. One inch is exactly 2.54 centimeters. 98" * 2.54 = 248.92cm■
Imperial.
25g is approximately 1 oz This is often used for easy conversion of recipes from imperial to metric measurements. A more accurate conversion is 1 oz ~= 28.35g