Study guides

Q: How many square inches are in a 4 inch by 5 yard roll?

Write your answer...

Submit

Related questions

The roll has 12.5 square feet of material.

20

2 x 10 x 36 = 720 square inches... 720 / 18 = 40 units !

300 square feet.

37.5 square feet.

20 sq ft = 20*12*12 = 2880 sq inches 8 inch * 10 inch = 80 sq inches. Maximum number of rectangles (NOT SQUARES!) is 2880/80 = 36. This is a maximum because the answer depends on the dimensions of the roll. If, for example, the roll were 1 ft*20 ft, you will get only 1 rectanle across and 30 along the length. You will have a 2 inch*20 ft strip of waste.

120 x 13.3 1596 inches

24 inches*50yards = 24 inches * 50*3*12 inches = 24 inches * 1800 inches = 43 200 square inches.

If you cut 1 inch for waste off the 16 inch width and 3 inches off the 100 foot (1200 inch ) length you have 3 x 171= 523 pieces

270 square feet.

A roll 2 foot by 30 foot contains 60 square feet. There are 144 square inches in a square foot. So the roll contains 8630 square inches = and you get all of these for 30 units of currency. I will assume that the unit of currency contains 100 smaller units. so the price is 3000 small units. This means that the cost per sq inch = 3000/8630 = 0.347 small units = just slightly more than one-third of the small unit.

29 inches

If the vinyl is 2 inches wide and you need the cost for 1 inch, it is half the cost - and that is 57.00/2 = 28.50

12 yards x 360 yards = 4,320 square yards. 4320 sq yd = 4,320 x 36 x 36 square inches = 5,598,720 square inches

1 square foot = 144 square inches9 inches = 9/12 foot = 0.750.75 x 2,750 = 2,062.5 square feet = 297,000square inches

Easy way to figure it: If the roll is 3 feet by 100 feet, it would cover 300 square feet. But you have to overlap it about 6 inches at top and bottom, so once you subtract that, it would cover about 200 square feet., When figuring a job, add some for overlap at valleys, chimneys, etc. . . Hope this helps. A standard roll of 30# felt covers 216 square feet; one-half the area of a roll of 15# felt, which covers 432 square feet. Rows are overlapped 2 inches, not 6 inches.

Roofing paper, or felt, normally comes in about 150ft rolls and are 3ft wide. Figure about 450 square feet of felt. Remember when estimating required amounts that you need to overlap the felt about 6 inches or so. With an overlap of 6 inches, 1 roll has a coverage of about 375 square feet.

how many calories in s square sausage and roll

No. 12 inches by 12 inches = 144 square inches. To get 150 square inches from a roll 12 inches wide, you would need to buy 12.5 inches. That would measure exactly 150 square inches.

Offset=Square Root of Roll squared+ Rise squaredFor Example:To find the travel and run for a 45 degree rolling offset with a roll of 11.5 inches and a rise of 15.5 inches:Solution Steps:Offset= Square Root of 11.5 inches squared +15.5 inches squaredOffset= Square Root of 132.25 inches+240.25 inchesOffset= Square Root of 372.5 inchesOffset= 19.3 or 19 5/16 (closest 16th of an inch)

how many square feet is in a roll of rolled roofinl

45"

I need to convert 24 Inches Wide by 50 Yards to Square Feet Each

2 196.04167 yards

about 200 calories