Want this question answered?
A Suspension :)
The diameter is about 5.1'
16 inch circumference: radius = diameter / 2. diameter = circumference/pi, so radius = 16 in / 2 / pi = (8/pi) inches [approx 2.55 inches] 16 inch diameter: radius = diameter / 2 = 16 in / 2 = 8 inches.
The circumference of a circle that is 16 mm in diameter is 50.27 mm
The circumference of a circle with a diameter of 16 centimeters is 50.27 cm
mesh 500 micron=31 inches=0.0012
No. of openings per square inch of wire mesh is specifies the mesh size and its again depends on wire dia also. If the number of openings per square inch is more then partical size which it can pass through the filter will be less. For example for 325 mesh size, where in 44 micron size of particle can get filter. In 200 mesh size 74 micron size of particle will get filter.
Mesh denotes particle size or granulation of powder. When guar gum powder is prepared, it is granulated through mesh screens during the sieving process. +40 mesh means powder will pass through a sieve of 40 mesh. -100 mesh means powder will not pass through a sieve of 100 mesh. +40/-100 mesh guar gum powder means 90% of powder will pass through 40mesh but not through 100 mesh. Hence particle size lies between 40mesh and 100mesh. Read wikipedia article on mesh.
Diameter of a sphere having the same volume as the particle
16 is probably wire guage.
Mesh Tenney was born on 1907-11-16.
Microcrystalline cellulose is commercially available in different particle sizes and moisture grades which have different properties and applications.Avicel PH 101Has a nominal mean particle size of 50 microns
Cc = (D30)^2 / (D10 * D60) Where: * D60 is the particle-size diameter for which 60 percent of the sample was finer, and, * D30 is the particle-size diameter for which 30 percent of the sample was finer. * D10 is the particle-size diameter for which 10 percent of the sample was finer.
Diameter = Circumference / Pi Diameter = 16 / 3.14 Diameter = 5.095
1 nanometer
BRC is a wire mesh which the diameter of the wire is 10mm and the holes size are 200mmx200mm.
The 200-400 mesh size is best for DNA extraction. The smaller sizes are usually used for metal ion extraction.