0
There is no single diameter - there are steel rods of different diameters for different uses.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
How many steel bars in 10mm bundle?
1 bundle 10mm ms rod= how many rod
How many 16mm steel bars in one ton?
"16 mm" probably refers to the diameter. The mass of a steel bar depends not only on its diameter, but also on its length.
What is the formula for the surface area of a pure rod?
Im not sure what you mean by a pure rod, but if you are talking about a solid rod, which is simply a cylinder, you can calculate its area as follows: πDL+(πR²)2 Which is pi times the diameter times the length plus pi times the radius squared multiplied by 2.
How much does a solid steel pipe 6 inches round by 24 inches long weight?
"Solid Steel" would not be a pipe- it would be a rod. Weight of pipe will vary depending on the thickness of the wall of the pipe.
A steel wire of length 4m and diameter 0.5mm stertches by 4 mm under the action of a load of 4kg.What is the Young's modulus of the material?
Answer
What is the standard diameter of a closet rod?
Steel Rod: 1 1/4" diameter.
What does one foot of 1 steel rod weigh?
The weight of 1 foot of steel rod would depend on the diameter of the rod.
What is the least diameter of steelrod?
The smallest commercially (easily) available steel rod is about 0.014" diameter.
How do you calculate unit weight of steel?
weight of all steel can be calculated by multiplying unit volume with density.
What is the weight of a steel rod whose dimensions are 25mm diameter and 3050mm long?
Solid? or Hollow?
What is stronger a round steel pipe or a steel hollow square bar?
By stronger, we need to define the loading conditions of the rod or pipe. The strength of a rod or pipe is typically evaluated with axial, transverse (bending), and torsion loads. With the same diameter and the same material, a solid rod is stronger than a hollow pipe. However, with the same weight and material, the hollow pipe is stronger than a solid rod. Because a hollow pipe is lighter than a solid rod at the same diameter, the hollow pipe would have a larger diameter in order to match weights with the solid rod and a larger diameter rod or pipe is stronger than a smaller diameter one.
What is the weight of 20mm diameter steel bar per meter?
=D^((D^2/162) L) D^2 = Diameter of the rod L = Length of the rod
What is the weight of a steel rod whose dimensions are 6.5mm diameter and 1 meter length?
This depends on what type of steel. The density of carbon steel (one of the most common types of steel) is 7.85g/cm3Density = m/vradius of rod = 3.25mm (radius is 1/2 of diameter)3.25mm = .325 cm1 meter = 100cmvolume of cylinder = (pi)(radius)^2(h) = 33.18Density * Volume = mass7.85 * 33.18 = 260.46260.46 grams
What is the weight of steel rod 10.28 diameter of 1000mm?
In order to find the weight of the steel rod, we must know is mass and volume.Volume of a cylinder:Pi x r2 x lengthpi x (0.00514)2 x 1Volume = 8.3x10-5 m3Steel has a density of 7850 kg/m3Therefore the mass of the steel rod = 7850 x 8.3x10-5 = 0.652 kgWeight of rod = 0.652 x 9.81Weight of rod = 6.39 Newtons
What is lap Length of steel Bars?
Over lap of steel bar is provided 60 times of dia of steel bar. For example (.5") dia steel bar overlap length is (30"). (.5x60=30")
Can you weld steel to stainless steel?
Yep, you can weld steel to stainless and you can weld stainless to steel. You can use steel or stainless welding rod in either case but the steel or steel welding rod will of course rust.
How do you shrink fit a steel rod on a steel plate?
Heat the plate then, insert the rod. Hole in plate slightly smaller than rod.
