Want this question answered?
The modulus would be described as the distance between, it is without direction and would therefore always be positive.
the norm of the difference between 5.3 and 5.7 is 0.4
Subtraction followed by modulus does difference.
Its absolute value (or modulus).
sometimes
Division provides Quotient whereas Modulus provides Remainder.
The modulus would be described as the distance between, it is without direction and would therefore always be positive.
norm is genrally whereas standards are not genrally.
the norm of the difference between 5.3 and 5.7 is 0.4
a rule is written but a norm is a rule that it is not written but is stipulated
Divison is a divison of two integers and result is stored in some where. where as Modulus is remainder is stored in some where. EX:DIVISION 45/4=11 MODULUS 45%4=1
Subtraction followed by modulus does difference.
The elastic modulus, also called Young's modulus, is identical to the tensile modulus. It relates stress to strain when loaded in tension.
Young Modulus is the slope of the stress-strain diagram in the linear elastic region. This is the most common use of modulus. As the material goes non-linear in the stress strain curve, thre slope will get increasingly lower. In this case one connects the end points of the stress strain diagram at the point of interest with a straight line. The slope of that straight line is the secant modulus.
There is no difference between unconventional and non-conventional. You can use both either of these words to reference something that is not considered the norm.
The polypropylene Young modulus is between 1,5 and 2,0 GPa.
Young's Modulus (modulus of elasticity) describes the stress-strain behavior of a material under monotonic loading. The dynamic modulus of elasticity describes the same behavior under cyclic or vibratory loading.