The ratio of the constituents of a mixture cannot be determined.
Slump test
yes. a ratio of two to one.
Relative humidity (RH) is the ratio of the partial pressure of water vapour to the saturation vapour pressure of water at the same temperature. Relative humidity depends on temperature and the pressure. Very roughly speaking, it is a ratio of the amount of water vapour in the air compared to the total amount of water vapour that it possible for that air to contain.
The ratio is 1:6 chemicals to water, so for half a gallon of water, you use 1/12 a gallon of chemicals
High expansion foam that is 500 to 1 expansion ratio
10.
845
The coefficient of superficial expansion refers to the ratio of change in area to an increase in its temperature. It measures the expansion of a Laminar surface.
temperaturewater's most density: 4 degrees Celsius ( = lowest expansion rate)
1:800
The frozen expansion volume of saline water varies according to the solution, freezing temperature, as the air bubbles are not uniform. The density of frozen saline water is approximately 0.9 gm/L compared to pure ice which is 0.9 gm/L. It has an overall comparison ratio of approximately 0:8.
The expansion of water when it is cooled from four degree centigrade to zero degree centigrade is known as "anomalous expansion of water." The unusual behaviour of water, when it expands below 4° celsius to 0° is called anmalus expansion of water.
1:860
to circulate water in fresh water tank to expansion talk.
To allow for the expansion of heated thot water
In context of thread, do you not mean the expansion ratio of vinegar mixed with sodium bicarbonate and the resultant volume of CO2? I would think that the expansion level of boiling vinegar would be in proportion to how much water is in a typical vinegar solution. Then you would extrapolate that from what we already know about the expansion ratio of water to steam.