40
Lateral Area - APEX (No need for a long answer) Well, it's the area of a rectangular hole cut out of a piece of paper, through which the cylinder can just exactly pass, and it's also the area of the cylinder's shadow on a wall.
The volume of a cylinder 4 feet in diameter by 30 feet long is: 376.99 cubic feet.
The volume is 0.87266 cubic feet.
One thousand seventy-six cubic feet
Area is calculated by multiplying width x length. Thus the square feet in an area 20 feet wide by 24 feet long is 20 x 24 = 480 square feet.
A cylinder 10 feet in diameter by 75 feet long has a surface area of 2,513.3 square feet.
The formula for the area of the lateral surface of a cylinder is pi X diameter X length, when the length and diameter are in the same units. In this instance, the diameter is stated in inches but can be converted to 1.0 foot and then agrees with the units of the length given. The formula yields an answer of 4.7 X 102 square feet to the justified number of significant digits (limited by the number of significant digits in the given value "12"). If the given integers are considered exact, the answer is about 4.71238898 X 102 square feet.If the two ends of the cylinder are to be considered as part of its area, note that each end is a cylinder with a diameter of 1.0 foot, therefore a radius of 0.50 feet and therefore has an area of pi/4 square feet or about 0.79 square feet. Twice this value should be added to the lateral area to obtain the complete surface area of the cylinder.
Lateral Area - APEX (No need for a long answer) Well, it's the area of a rectangular hole cut out of a piece of paper, through which the cylinder can just exactly pass, and it's also the area of the cylinder's shadow on a wall.
The volume of a cylinder 8 feet long by 3 feet wide is: 56.5 cubic feet.
The volume of an cylinder of 8 feet long and 3 feet in diameter is: 56.5 cubic feet.
The volume of a cylinder that is 12 feet long but has a radius of 5 feet is: 942 cubic feet.
The volume of a cylinder 4 feet in diameter by 30 feet long is: 376.99 cubic feet.
The volume of a cylinder with a 2 diameter that is 12 feet long is 37.7 cubic feet.
This cylinder has a volume of 1,845.69 cubic feet.
height * circumference (picture the cylinder cut along the long edge, then rolled out flat, and you would measure height * width) note: if you need to include the circles at the top and bottom of the cylinder, add (circumference / 3.1415926 )^2 * 2 * 3.1415926
The circumference of the circular end is 8 pi = approx. 25.1 ft. In your mind's eye, slit the cylinder along its length and flatten it out. You now have a rectangle that is 25.1-ft long and 7-ft wide. Its area is the surface area of the original cylinder = approx. 175.9 sq.ft.
The volume of a cylinder eight inches wide and five feet long is: 3,016 cubic inches or 1.745 cubic feet.