answersLogoWhite

0


Best Answer

The maximum house amperage is determined by a couple things: First and most important is the size of the service wire and whether it's copper or aluminum. Second is the size of the meter base/shutoff. And third is the size of the house breaker panel. Contact a reputable electrician in your area to help you with making any changes. This isn't like changing a lightbulb. You have to know what your doing or you could burn down the house. After your electrician has determined what your upgraded service disconnect/breaker will be, he will tell the power company the requirement so they can inspect and upgrade your service drop, if necessary, to carry the additional current. We recently upgraded and the power company had to put in a new transformer on the pole.

User Avatar

Wiki User

17y ago
This answer is:
User Avatar
More answers
User Avatar

AnswerBot

1w ago

The maximum electrical load for a house is typically determined by the capacity of the main breaker panel, which is sized based on the house's wiring and other factors. Upgrading the main breaker panel to a higher amperage can increase the maximum load capacity, but it must be done by a licensed electrician to ensure it is done safely and in compliance with local electrical codes. The specific limit will depend on the existing wiring, appliances, and the local regulations.

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What is the limit of electricity amps watts you can have in a single house with the main breaker being changed out to its maximum potential or amps safely?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Natural Sciences

What does aic mean on breakers?

AIC stands for Ampere Interrupting Capacity, which is the maximum current the breaker can safely interrupt without damage. This rating is important for ensuring the breaker can handle and safely interrupt any potential fault currents in the electrical system.


What happens when you plug a 30 amp appliance into a 50 amp breaker?

The appliance works perfectly. If you did it the other way around (50amps on a 30amp breaker, you would be tripping the breaker. Think of it as a mercury thermometer. The circuit breaker is the maximum temperature and the load on that breaker is the mercury. If the load is lower than the max, everything works beautifully. If the load becomes greater than the maximum rating, then things starting popping.


How do you read breaker box amps?

To determine the amps of a breaker box, look at the main breaker or label inside the panel. The number on the main breaker indicates the maximum amperage that the breaker box can handle. Make sure not to exceed this amperage to prevent electrical hazards.


Explain how the maximum height is related to the maximum potential energy?

This question makes sense in the context of something like a pendulum. At the top of its swing, a pendulum is at maximum height, is not moving and so has zero kinetic energy, and has maximum potential energy since all its energy is potential. As it falls, it gradually moves with increasing speed, so its potential energy is being converted to kinetic energy. At the bottom of the swing, it is moving at maximum speed, and all its energy is kinetic, none is potential, Then it starts to move upwards again, and its kinetic energy is gradually converted back to potential energy.


What size main breaker do you need to run 10 gauge wire?

The size of the main breaker depends on the maximum current rating of the 10 gauge wire and the load it will be powering. Typically, a 10 gauge wire is rated for a maximum current of 30 amps. Therefore, a 30 amp main breaker would be suitable for running 10 gauge wire. However, it is important to consult local electrical codes and consider the specific load requirements before making a final determination.

Related questions

Is gravitational potential maximum at poles or at equator?

Gravitational potential is maximum at poles.


Rupturing capacity of a circuit breaker?

the maximum short current that can be safely break by the circuit breaker.


Is there a difference between 480volt 30 amp breaker and 208volt 30 amp breaker?

Yes, all breakers have an insulation factor as to the maximum amount of voltage the device can be subjected to. A 208 volt breaker has a maximum up to and including 240 volts. A 480 volt breaker has a maximum up to and including 600 volts. A higher voltage rating breaker can be used on lower voltages but not the other way around.


What is the maximum voltage for vacuum Circuit Breaker?

The maximum rating or a VCB is 32 KV.The maximum curent rating is up to 3000 A.


Is a double throw 15amp breaker the same as a 30 amp breaker amp?

You have a double pole breaker for 240Volt supply. The maximum current is 15 amp.


When pendulum stops has the kinetic energy changed to potential energy?

As the pendulum stops swinging, its maximum kinetic energy (the initial energy at the beginning of the swing) decreases, and its potential energy increases. Once the pendulum stops, it will have zero kinetic energy and maximum potential energy.


What happens when you plug a 30 amp appliance into a 50 amp breaker?

The appliance works perfectly. If you did it the other way around (50amps on a 30amp breaker, you would be tripping the breaker. Think of it as a mercury thermometer. The circuit breaker is the maximum temperature and the load on that breaker is the mercury. If the load is lower than the max, everything works beautifully. If the load becomes greater than the maximum rating, then things starting popping.


What actions to be taken should a main generator circuit breaker stay connected?

I don't understand the question. <<>> If your generator's main breaker does not trip when an overload occurs on the generator's output the breaker's trip setting needs to be looked at. Usually the molded case breaker's face cover can be removed. This will allow you access to the trip settings. Set the overloads to the maximum generator's output. The short circuit setting should be set at 250% of the maximum generator output. If these parameters can not be met on the existing breaker there might be a chance that the breaker has been changed out at some point in time and the wrong breaker was installed at that time. This scenario happens quite frequently on remote operations where the service has to be maintained and the site doesn't have a second back up generator. The site supervisor usually says "just make it work".


Where is its gravitational potential energy a maximum?

An object's gravitational potential energy is at its maximum when it is at its highest point in the system, such as at the peak of a hill or when it is the farthest distance away from the source of the gravitational field. This is because the potential energy is directly proportional to the height and distance from the reference point.


When does the string of a car on a roller coaster store its maximum gravitational potential energy?

Any object has maximum gravitational potential energy when it is at its highest position.


Why should you not fill the kettle to its maximum?

it is a waste of electricity


If you throw a ball into the air where will it have the greatest gravitational potential energy?

The ball has the highest gravitational potential energy when it is at its highest point in the air, as that is when it has a velocity of zero and is up the highest.