Best Answer

Pressure in seawater at 100 feet is 44 psi. Or, .44 pounds per square inch per 1 foot. For Fresh water, it is .43 psi per foot.

Q: What is the pressure in pounds per square inch at a depth of 100 feet of seawater.?

Write your answer...

Submit

Still have questions?

Continue Learning about Math & Arithmetic

I presume you mean at a depth of 180 feet. Since the weight of a cubic foot of water is approximately 65 pounds, the weight of water on a square foot at that depth is 65 times 180, which is 11,700 pounds. That is the pressure per square foot. Since there are 12 x 12 or 144 square inches in a square foot, the pressure in pounds per square inch would be 11,700 divided by 144, or about 81. This is in addition to the barometric pressure, which is about 14 pounds per square inch, for a total of 95 psi.Answer 1It's not possible for a water tank to be 180 feet. One of its dimensions could be, however.Sadly, since we don't know which dimension it is, nor do we know the height ofthe tank or the depth of the water in it, nor do we know at what level or in whichdirection you want the pressure measured, there's no way at all to even begin towork on a solution to this question.

It's a unit of pressure. 1 bar = 14psi (pounds per square inch). Every 6 feet underwater you go, The pressure increases by 1 bar. Therefore - if your watch has (for example) 2 bar written on it, it's capable of taking the water pressure at a depth of 12 feet.

1 square meter. The depth is irrelevant in this question.

Total square footage of the sides of a pool = perimeter*depth.If the depth is not uniform but has a constant gradient, then average depth can be used instead.For other depth profiles, the calculation becomes more complex.Total square footage of the sides of a pool = perimeter*depth.If the depth is not uniform but has a constant gradient, then average depth can be used instead.For other depth profiles, the calculation becomes more complex.Total square footage of the sides of a pool = perimeter*depth.If the depth is not uniform but has a constant gradient, then average depth can be used instead.For other depth profiles, the calculation becomes more complex.Total square footage of the sides of a pool = perimeter*depth.If the depth is not uniform but has a constant gradient, then average depth can be used instead.For other depth profiles, the calculation becomes more complex.

40 pounds of topsoil is about 2 cubic feet, which will cover an area of 12 square feet at 2 inches deep.600 square feet divided by 12 square feet per bag is 50 bags.Answer50 bags

Related questions

The pressure at 1200 feet below sea level is approximately 517.2 pounds per square inch (psi). This value is calculated using the formula: pressure = depth × density of seawater × acceleration due to gravity.

The gauge pressure of seawater at a depth of 250m is approximately 24.5 atm. This can be calculated using the formula P = ρgh, where P is pressure, ρ is density, g is acceleration due to gravity, and h is depth.

1440

At 125 degrees Celsius, the pressure of seawater varies depending on the depth. On average, at a depth of 1000 meters, the pressure of seawater at this temperature would be around 111 times atmospheric pressure (approximately 1110 bar).

The water pressure at 3 kilometers depth is roughly 300 atmospheres, which is equivalent to around 4400 pounds per square inch (psi). At this depth, the weight of the water above creates significant pressure due to gravity.

The water pressure at 5000 feet depth is approximately 2200 pounds per square inch (psi). This pressure increases by 0.44 psi for every foot of depth.

Divide the difference in pressure by the difference in depth.

The water pressure at a depth of 2.3 miles underwater is approximately 3,216 pounds per square inch (psi). At this depth, the weight of the water above exerts a significant force, creating high pressure conditions that can be challenging for structures and equipment.

At 5,500 feet down, the pressure on the vessel would be 2,458.71 pounds per square inch.

The pressure at 400 feet below sea level would be approximately 173.5 psi (pounds per square inch). This is because for every 33 feet of depth in seawater, the pressure increases by 1 atm or 14.7 psi.

The water pressure at 1000 feet is approximately 433 pounds per square inch (psi). This is because for every 2.31 feet of depth in water, the pressure increases by 1 psi due to the weight of the water column above.

As depth increases, water pressure also increases due to the weight of the water column above exerting a force downwards. The increase in pressure is approximately 1 atmosphere (14.7 pounds per square inch) for every 10 meters of depth.