The time it takes to cover 200 meters on a treadmill depends on the speed at which you're running or walking. For example, if you are running at a speed of 10 km/h (which is roughly 2.78 meters per second), it would take about 72 seconds, or 1.2 minutes, to cover that distance. If you walk at a speed of 5 km/h (about 1.39 meters per second), it would take approximately 143 seconds, or about 2.4 minutes. Adjust your time based on your specific speed.
500 meters/5 minutes = 100 meters per minute.
Speed = frequency x wavelength. 200 hertz = 200 waves per second. These 200 waves will have a speed of 200*300 = 60,000 m/s The 1000 waves will have the same speed but it will take 5 times longer to travel the 300 metres.
Wow, 3 miles per second is running fast. At 1609.34 meters per mile, this converts to 4828.02 meters per second. Since 5 minutes is 300 seconds,this means you would run 1448406 meters in that time.
200 meters is 1/5 of a kilometer
If you walked at 5 km/hr (about 3 mi/hr), then you could walk 1 km in 12 minutes, and thus 200 meters (1/5th km) in 2 minutes and 24 seconds.
The sprinter's speed is 5 meters per second. This is calculated by dividing the distance (200 meters) by the time taken (40 seconds).
The time it takes to cover 200 meters on a treadmill depends on the speed at which you're running or walking. For example, if you are running at a speed of 10 km/h (which is roughly 2.78 meters per second), it would take about 72 seconds, or 1.2 minutes, to cover that distance. If you walk at a speed of 5 km/h (about 1.39 meters per second), it would take approximately 143 seconds, or about 2.4 minutes. Adjust your time based on your specific speed.
500 meters/5 minutes = 100 meters per minute.
Speed = frequency x wavelength. 200 hertz = 200 waves per second. These 200 waves will have a speed of 200*300 = 60,000 m/s The 1000 waves will have the same speed but it will take 5 times longer to travel the 300 metres.
Speed is not measured in units of time (minutes, seconds). If you want the speed in metres per second, divide 1500 by 322.
(1,000 meters/20 minutes) x (1 minute/60 seconds) = 5/6 meter per second
The total displacement of the jogger can be found by adding up the individual displacements from each segment. The displacement for the first segment is (5 m/s) * (4 minutes) = 20 meters. The displacement for the second segment is (4 m/s) * (3 minutes) = 12 meters. Therefore, the total displacement is 20 meters + 12 meters = 32 meters.
To calculate speed, you need to divide the distance traveled by the time taken. In this case, the runner covers 200 meters in 50 seconds. Therefore, the speed of the runner would be 200 meters divided by 50 seconds, which equals 4 meters per second.
200 ft per 40 minutes 5 feet per minute 1 inch per second 0.0568 mile per hour (rounded)
.5 miles per minute
how long would it take you to hop 30 meters based on your speed on the 5 meter trial?