0
If 75 feet is the circumference of the pond then its radius works out as 12 feet rounded to the nearest whole number and its surface area is pi*12^2 which is 144*pi square feet.
Wiki User
∙ 6y ago
Add your answer:
Earn +20 pts
What meters is used to measure surface area of a pond?
The surface area of the pond is measured in square meters.
How many gallons is 21780 square feet in a 10 foot deep pond?
Volume = (surface area) x (depth) = 217,800 cubic feet = 1,629,257.1 gallons (rounded)
How many gallons is in my round pond that has a 12 foot diam and is 20 inches deep?
1409.23 gallons. Assuming that your pond is a cylinder shaped pond, then the formula pi * radius squared * height would work in this situation. 20 inch= 1.66 feet = height. pi * 6 feet squared * 1.66 feet = 188.4 feet cubed. 1 foot cubed = 7.48 gallons roughly. 188.4 * 7.48 = 1409.23.
How many gallons of water does your pond have its 9x16?
If the surface is 9-ft by 16-ft, and the sides are straight all the way down,then the amount of water in it is 1,077.2 gallons for every 1 foot of depth.
How many gallons of water will fill a 6 foot long by 4 foot wide by 4 foot deep pond?
598 Imperial gallons, approx.
What meters is used to measure surface area of a pond?
The surface area of the pond is measured in square meters.
How many gallons is 21780 square feet in a 10 foot deep pond?
Volume = (surface area) x (depth) = 217,800 cubic feet = 1,629,257.1 gallons (rounded)
Where is the Round Pond Schoolhouse Association in Round Pond Maine located?
The address of the Round Pond Schoolhouse Association is: Po Box 205, Round Pond, ME 04564-0205
We want to construct a circular pond to allow 2 square feet of suface area on the pond for every 6 inch of fish.what is 2 square feet for every 6 inch fish?
The question has a variable missing. The number and adult size of the fish. The assumed rule if thumb is for every 6 inches of fish in length, 2 square feet of surface area is required. For math purposes, lets make it 4 square feet for each foot of fish. This is to be assumed for the adult size of the fish. If you want 10 fish, at one foot in length, you will need 40 square feet of surface area. If the pond was rectangular, a 4 ft X 10 ft or an 8 ft X 5 ft pond would do. As a square, a 6 and 2/3 ft square pond will give the same surface area needed. As a circular pond, you will need to do some math at this point. The area of a circle is pi (3.14) times the radius (half the diameter) squared. Since a circle has less surface area than a square, we know it will have to be larger in diameter than the 6 and 2/3 feet metioned above. A 7 foot diameter pond will give you, (3.5 radius, or half the diameter, squared is 12.25, then multiplied by pi, or 3.14) 38.465 square feet of surface area. This will support 10 fish at 1 foot in length, or 20 at 6 inches in length. See the related link for more information.
Ripples on a surface of a pond?
Ripples on the surface of a pond are an example of wave motion.
Where are pond skates found in the pond?
Surface of water
What is the muscular pond snail's foot called?
the foot
When lillies cover the pond surface the pond does not get hot during the day why does the pond not get hot?
explain why the pond does not get hot?
How do you' solve level 3 of enigmous?
the answer is 28 days. if 1 lily covers the whole pond on the 30th day, then it covered half the pond on the 29th day and a quarter of the pond on the 28th day. 2 lilys on the 28th day, each covering a quarter of the pond, cover a total surface area of half the pond.
What is the area of Thompson Pond?
The area of Thompson Pond is 303,514.23168 square meters.
What is the area of Watchaug Pond?
The area of Watchaug Pond is 2,318,848.7300352002 square meters.
What is the area of Sunfish Pond?
The area of Sunfish Pond is 178,061.6825856 square meters.
