The United States Mint lists the following specs:
weight: 2.500 grams diameter: 19.05 mm thickness: 1.55mm
In the real world, there are minor variations, due to sloppy manufacturing
and wear. On one side of a penny, the edge might measure 1.27mm, the
other side of the same coin, 1.54mm. Differences are easily visible.
The height of a penny is the thickness: 1.55 mm (millimeters)
19mm, Thickness is 1.55mm
The diameter is 19mm, thickness is 1.55mm.
Nominal thickness is 1.55mm
it is approx the thickness of a penny
the thickness of penny is 2mm
The height of a penny is the thickness: 1.55 mm (millimeters)
1.55mm at the rim
19mm, Thickness is 1.55mm
1.68 Milimeters
it is approx the thickness of a penny
Nominal thickness is 1.55mm
The diameter is 19mm, thickness is 1.55mm.
The diameter is 19mm, thickness is 1.55mm.
The bronze English one penny piece, as minted between 1971 and 1992, was 1.52 millimetres thick. The steel one penny piece, as minted since 1992, measures 1.65 millimetres in thickness.
You can get a stack of pennies, measure the height of the stack and then divide by the number of pennies. You can also get the thickness by treating the penny as a cylinder, calculating the area of the face of the penny, then putting a whole lot of them in water, measuring the change of volume to get the total volume of all pennies, then divide by the number of pennies and divide again by the area of the penny to get the thickness.
yes i had one that sold for 400 dollars