9 x 9 x 12 cubic inches
The pipe's volume is the product of its cross-sectional area and its length. The area of a circle is pi*(radius)^2, so in this case pi*9sq.in. or about 28.3 square inches. Multiply this area by the length of pipe you are using to obtain a volume. A 10 foot length of 6 inch pipe will have 3393 cubic inches of volume or 1.96 cubic feet, or 14.7 US Gallons.
A square foot is a unit of area. An inch is a unit of length. The two units are therefore incompatible.
A square foot is a measurement of area. An inch is a measurement of length. They are not compatible.
A square foot is a unit of area. An inch is a unit of length. The two units are therefore incompatible.
square feet
The volume is 53,014.4 cubic inches or 229.5 US gallons.
The board-foot is a specialized unit of volume for measuring lumber in the United States and Canada. It is the volume of a one foot length of a board one foot wide and one inch thick.
We would have to know the length of the tube.
The cost of construction per square foot is the same as the cost of an automobile per inch of length.
For area measurements, you multiply the length by the width. Here the calculation gives you an answer of 912 square inches. That means it is 6.33 square feet.
There are no inches in 1 square foot. A square foot is a measure of area. An inch is a measure of length. The two are incompatible. However, there are 144 square inches in a square foot.
One square inch is 1/144 of a square foot.1 square inch = 0.006944 square foot (rounded)1 square foot = 144 square inches