The volume of sand is about 1,602 grams per cubic centimeter. That is the equivalent of 0.926 ounce per cubic inch.
You can very accurately determine the volume of sand using water. If you just take some sand and measure the volume, a lot of the volume you measure is actually the empty space between the sand crystals. If you want the true volume of the sand, you must use the water method.To do this, start with a known volume of water (use a graduated cylinder for instance). Record this volume. The weigh out a certain amount of sand, and add this sand to the water. When you do that, the volume of the water will increase. Record this new volume. Then simply subtract the initial volume from the final volume. This difference is the volume of the sand particles. You can also calculate the density of sand by this method since you weighed the sand before adding it, and the density is just weight ÷ volume.
almost the same way as most liquids because sand is in very little grains.ANS2:Since there is air between the grains, the volume is somewhat variable depending on how packed the sand is. To get the volume of the sand, pour the sand into water and measure the change in water level.
Because sand have also a volume.
'd say about 250ml. the sand fits in the space between the beans so the extra volume you'd get is the net volume of the beans
Bulking of sand means increase in it's volume due to presence of surface moisture . The volume increases with increase in moisture content . The volume may increase up to 20 to 40% when moisture content is 5 to 10 %.Due to moisture in each particle of sand, sand gets a coating of water due to surface tension which keeps the particles apart. This causes an increment in volume of sand known as Bulking.
Sand and water both have weight and both have volume. A cup (volume) of sand weighs more than an equal volume of water. So the sand pushes the water out of the way and sinks. A cup of wood chips weighs less than an equal volume of water. So the water pushes the wood chips out of the way and they float. Try it and see.
What fraction of the soil volume is void space
the volume of a standard head pan is 0.0175cu.m
the volume of a standard head pan is 0.0175cu.m
For this, you can work out the volume of the cylinder of sand you need to fill. But you'll also need to know the density of the sand to convert this volume into weight.
Yes because the sand adds more mass to the mass of the water, therefore the density and volume also change
Bulking of sand means increase in it's volume due to presence of surface moisture . The volume increases with increase in moisture content . The volume may increase up to 20 to 40% when moisture content is 5 to 10 %.Due to moisture in each particle of sand, sand gets a coating of water due to surface tension which keeps the particles apart. This causes an increment in volume of sand known as Bulking.- Edited by KASEE SREENIVAS# Hindustan Construction Company