0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is the weight of a 24 x 24 marble tile?
64 pounds aprox
What is the weight of a 6 x 6 wall tile?
It depends on the material that it is made of and so the density of that material.
The average weight of 12 men decreases by 2 kg when one of them weighing 84 kg is replaced by a new man The weight of the new man is?
The average weight of 12 men decreases by 2 kg when one of them weighing 91 kg was replaced by a new man. Find the weight of the new man.
How can we calculate woven fabric weight by just having its area e.g 20x3060x50?
Total weight of fabric = 1 sqr meter warp + 1 sqr meter weft Total weight of fabric = 60/20 x 25 + 60/20 x25Total weight of fabric = 150 GSM.60/20x25+60/30x25 Total weight of fabric =125 gsm
How many 4 in x 4 in tile in sixty sq ft?
A 4 inch by 4 inch tile is 16 square inches. 60 square feet is 8640 square inches. Dividing the one by the other shows us that 540 tiles 4 inches on a side will cover an area of 60 square feet.
What adhesive do you use for a 20 x 20 inch porcelain tile?
Thinset tile cement.
How much does porcelain floor tile weigh?
Depends on the size of the squares, thickness, material composition. 12" x 12" Porcelain tiles weigh about 4.5 lbs.
What is the weight of a 24 x 24 marble tile?
64 pounds aprox
How much does a 12 x 24 porcelain tile weigh?
A tile that I used for the shower backsplash weighs 6.5 pounds. The installer said they are difficult to put up since they are heavy and unwieldy so getting them flat is a trick. Probably not a job for amateurs.
What is the weight of a 6 x 6 wall tile?
It depends on the material that it is made of and so the density of that material.
How much does a 6 x 6 ceramic tile weigh?
Not sure how exact you neeed to be, but the thickness & the density would be unknowns from your question & they will both impact the answer. A 6X6 wall tile will be less than floor tile & thick tile likely more than thinner. But if you use 8-10 ounces per 6X6 floor tile you will be very close. Add thinset & grout & still more variables crop up. That is if it is really ceramic, travertine, porcelain or Saltillo would all be different too.
What is a unit tile and x tile?
The unit tile is one centimeter by one centimeter. The x tile is one centimeter wide by about 4.5 centimeters long.
What is the average labor cost for porcelain tile installation?
In southeastern PA, the cost of installing porcelain tile should begin around $4.00 per square foot. This price represents a basic installation of simple 12 X 12 tile over a smooth, flat concrete surface. Upgrades would include a large format tile (larger than 12 X 12), a patterned installation, or any special considerations such as expansion joints and transitions. If the tile is being installed over a plywood sub-floor, an approved cement or fiber-cement based subfloor must be installed prior to the installation of the tile. This labor charge usually runs about $2.00 per square foot (materials are additional). Grout installation is included in the tile installation labor charge. Installation of tile on walls in showers and kitchens is usually higher and usually requires a site visit prior to pricing.
What is your mass of you if you weigh 60 pounds?
Your mass is 60 pounds. Your weight is (60/2.2) x 9.81 = 267.545 Newtons
20 grams is 60 percent of what weight?
20 g = 60% x W thus W = 20g / 60% = 33.3g
The average weight of 12 men decreases by 2 kg when one of them weighing 84 kg is replaced by a new man The weight of the new man is?
The average weight of 12 men decreases by 2 kg when one of them weighing 91 kg was replaced by a new man. Find the weight of the new man.
How can we calculate woven fabric weight by just having its area e.g 20x3060x50?
Total weight of fabric = 1 sqr meter warp + 1 sqr meter weft Total weight of fabric = 60/20 x 25 + 60/20 x25Total weight of fabric = 150 GSM.60/20x25+60/30x25 Total weight of fabric =125 gsm
