0
What else can I help you with?
What is the weight of a 24 x 24 marble tile?
64 pounds aprox
What is the weight of 60 x 60 porcelain tile?
The weight of a 60 x 60 cm (approximately 24 x 24 inches) porcelain tile typically ranges from 4 to 7 kg (about 8.8 to 15.4 lbs) per tile, depending on its thickness and density. Thicker tiles or those with additional features may weigh more. For precise weight, it's best to check the manufacturer's specifications for the specific tile in question.
How many tiles do you need to cover a floor that is 11 ft 6 in long and 6 ft and 5 in wide?
Assuming the tile is standard 12" x 12" tile without any waste you would need 75 ft. Typically tile needs a waste factor of 10% giving you a final number of 83 tile.
What is the weight per foot of 6 x 6 Oak beam?
it is about 35 :)
How many 6 x 20 tiles do you need to cover 30 square feet?
A quarter of one tile (6 ft * 20 ft) will be sufficient!
How much does a 6 x 6 ceramic tile weigh?
Not sure how exact you neeed to be, but the thickness & the density would be unknowns from your question & they will both impact the answer. A 6X6 wall tile will be less than floor tile & thick tile likely more than thinner. But if you use 8-10 ounces per 6X6 floor tile you will be very close. Add thinset & grout & still more variables crop up. That is if it is really ceramic, travertine, porcelain or Saltillo would all be different too.
What is the weight of a 24 x 24 marble tile?
64 pounds aprox
How many 3 x 6 tile will it take to cover 29 sq ft?
It depends on the measurement units used for the tile. 2 tiles of 3 ft x 6 ft will be more than enough.
How many tiles do you need for a 400 square ft area if tile is 6 X 24?
6 x 24 inch tile = 144 sq in = 1 sq ft 400/1 = 400 tiles
How many 3 x 6 tile will it take to cover 7 ft?
1
What is a unit tile and x tile?
The unit tile is one centimeter by one centimeter. The x tile is one centimeter wide by about 4.5 centimeters long.
How do you calculate weight of bronze pipe?
To calculate the weight of a bronze pipe, you need to know the dimensions (length, outer diameter, and wall thickness) of the pipe. Then, you can use the formula: weight = (outer diameter - wall thickness) x wall thickness x length x density of bronze. Finally, multiply the result by the density of the bronze material to get the weight.
How do you calculate the weight of a pre-cast concrete tilt-wall panel?
To calculate the weight of a pre-cast concrete tilt-wall panel, you would need to know the volume of the panel and the density of concrete typically used in such panels. You can then multiply the volume by the density to determine the weight. The formula would be weight = volume x density.
How many sq ft does 63 15x15 tile cover?
The measurement units for the tiles are not given. Assuming the tiles are 15 cm x 15 cm (the metric equivalent of the old 6" x 6" tile), the area of each tile is 0.2422 sq feet (approx) so that 63 tiles will cover 15.26 sq ft.
How many tiles do you need to cover a floor that is 11 ft 6 in long and 6 ft and 5 in wide?
Assuming the tile is standard 12" x 12" tile without any waste you would need 75 ft. Typically tile needs a waste factor of 10% giving you a final number of 83 tile.
How much square feet in 4 x 18 tile?
1/3 x 3/2 = 3/6 Half a square foot
How much postage for x 6 x 9 envelope?
The postage for a 6 x 9 envelope would depend on the weight of it.
