Want this question answered?
Approximate Weight per Square Metre of Sheet (for 120 Gsm Coating) APPROXIMATE WEIGHT 7.45 Kg PER SQUARE METRE
It is simple ! = length in meters *width in meters *thickness in mm*density of the material (i.e 8.1 in this case )
mm is millimeters & wt is weight
Are you thinking of Mm? Molar mass. Or millimeters?
7mm, yo.
wt. of 100NB GI Pipe is 13.914 Kg/m
50 mm dia gi pipe 4mm thick
5.89 Kg / Mtr
Approximate Weight per Square Metre of Sheet (for 120 Gsm Coating) APPROXIMATE WEIGHT 7.45 Kg PER SQUARE METRE
Now a days ,gauge is normally replaced by mm size, for calculating per SQM wt of GI sheet just multiply 7850 by thickness in mm i.e per SQM wt of 0.55 mm sheet 7850x0.55 = 4.31 Kg/sqm
It is simple ! = length in meters *width in meters *thickness in mm*density of the material (i.e 8.1 in this case )
To calculate the coil length, you need to convert the coil size and its weight to the SI units.
3.04kg/mtr for 32mm(M) also used as riser pipes for Hand Pump Mark-II
A 30-06 in MM is a 7.62x61 round. Also considered a 30 cal.
2.10mm thk
Measure the width and thickness of the strip. Multiply them together to find the cross-section area, and treat it as normal wire of the same cross-section area. For example, 10 mm x 1 mm strip would be used like 10 sq. mm cable.
5cm9mm x 8cm5mm