The sides of a canal lock is made from bricks or concrete.
To make a rectangualr pyramid,you need a rectangle for the base, and four triangles on the sides.
There are many lengths that can be used to make triangles. Basically take the longest side, add the two shorter sides together, it can be a triangle as long as the 2 shorter sides added together are longer than the longest side.
124m
Somebody named Lui Hui used 372 sides to make a circle
Yes. When the lines are used to make a square, they're called "sides" of the square.
a trash can has four sides and a bottom.
Key blanks are used to make keys from. Cutting the particular notches to make it fit a certain lock is what turns a key blank into a key.
The Pitsburg seam.
If there is a slot or you can make one with a hacksaw: a screwdriver Lock a pair of nuts on the exposed threads and use an appropriate wrench to unscrew the bolt (use the wrench on the bottom nut)
Bender
justify
Vermiculite is not a suitable substrate.
the VLIF socket is used to make use of the set screw to lock the CPU into place.
yes there is a tool used to make poke the bottom of a pieace of candy
To make a rectangualr pyramid,you need a rectangle for the base, and four triangles on the sides.
There are many lengths that can be used to make triangles. Basically take the longest side, add the two shorter sides together, it can be a triangle as long as the 2 shorter sides added together are longer than the longest side.
I used a tennis ball with a hole, then put it on the lock and press as hard as I could. Do the same.Sometimes it may not work, keep trying!A2. You should make sure the fault is with the lock, and not with (say) worn door hinges.