That will depend on its length which has not been given.
gear with shaft dia40mm length 230 teeth 14 shaft dia 25mm width 6.5mm length 168mm
378*pi or 1187.522023 cubic units
Yes it does. It has height, width and length. As you use it, the volume becomes less as the bar becomes smaller.
25mm is just a tiny bit over 1 inch!
Divide by 1000 to change millimeters to meters; 25mm = 0.025m.
Area of 25mm dia multiply by length 6000mm multiply by density mins area of 21mm dia multiply by length 6000mm multiply by density.
Yes In the UK they can be bought from ForgeFix company It has the Bosch SDS fitting on it
Type your answer here... 3.85
8mm dia : 0.395 kg/m 10mm dia : 0.617 kg/m 12mm dia : 0.888 kg/m 16mm dia : 1.579 kg/m 20mm dia : 2.467 kg/m 25mm dia : 3.855 kg/m These are standard unit weights based on the density of steel @ 7850 kg/m3
Over lap of steel bar is provided 60 times of dia of steel bar. For example (.5") dia steel bar overlap length is (30"). (.5x60=30")
.7854 x 25mm x 25mm x 1000mm = 490,875 cubic mm converting to cc this is 490.875 cc (ml) formula: pi/4 x d2 x l = v
The volume is 52.03 cubic feet.
to calculate the weight of diffrent dia bars is d2/162 D=dia of bar , and multiply into 2 times then divide it by 162
0.62 kg/m is the unit weight of 10 mm dia, and you use the thumb rule for all other dia unit weight per metre = d*d/162 where- d is dia of bar/rod in mm
Over lap of steel bar is provided 60 times of dia of steel bar. For example (.5") dia steel bar overlap length is (30"). (.5x60=30")
Round dia 1370 mm x 1370 mm what is sqm area formula
The volume is 6.2832 cubic meters.