staircase is made in an angle of 20 to 30 degree and it shouldn't be more then 30 degree.
90 degree or Right Angle
When two lines intersect then the degree is called an angle. This does not work with parallel lines.
I found this information for the Taylor Made Burner XDs. * #4 (21-degree loft; 61.5-degree lie angle; 6.7mm offset) * #5 (23-degree loft; 62-degree lie angle; 6.3mm offset) * #6 (26-degree loft; 62.5-degree lie angle; 6mm offset) * #7 (30-degree loft; 63-degree lie angle; 5.7mm offset) * #8 (34-degree loft; 63.5-degree lie angle; 5.3mm offset) * #9 (39-degree loft; 64-degree lie angle; 5mm offset) * PW (44-degree loft; 64.5-degree lie angle; 4.7mm offset) * SW (49-degree loft; 64.5-degree lie angle; 2mm offset)
This is a good site: http://www.mathsisfun.com/geometry/degrees.html An angle of 90--called a 90 degree angle and a right angle--is the angle made where the wall touches the floor. Or draw a plus sign--the lines intersect making four 90 degree angles.
It will be in the form of an isosceles right angle triangle when it has a 90 and two 45 degree angles
60 degree angle at 4:12 At 4.00 the angle is 120 degrees. In 12 minutes the minute hand moves 72 degrees while the hour hand moves 6 degrees. So that 120 degree angle reduces by 66 degrees in 12 minutes, and the answer is 54 degrees.
no, it is impossible an angle of an equilateral triangle is always 60 degrees it can't be 90 degree
A right angle triangle is made up of one 90 degree angle and two acute angles and the three angles add up to 180 degrees.
The answer depends on which angle is given: whether it is the angle made by the sloping face with the base, or the angle at the apex or even the angle that the sloping face makes with the vertical. Essentially, though, you use Pythagoras's theorem or, equivalently, the sine rule.
Mitre Joints are joints made by bevelling each of two parts. at Two 45 degree angles to form a corner. Usually at a 90 degree angle. :)
This is a novelty item not made at the Mint. They sell regularly on eBay for a couple dollars. See the related links for more info.
Technically 364.999 to the Nth degree, since the hands of a clock go in circles, you could view them barely touching as an obtuse angle.
A protractor will indicate an angle that has to be made.
This is a novelty item made by altering two normal coins and gluing the pieces back together. These sell regularly on eBay for a couple of dollars.
An angle is made of 2 lines but aside is made of 1 line
an angle is made from 2 lines so a circle does not have angles
you would get 140 dollars because a clock forms a 90 degree angle only 4 times a day and if you multiply 4 and 7 you would get 28 multiply by 5 and you get 140$
The angle made by the incident ray with the normal is called the angle of incidence.
An included angle is the angle made by two lines with a common vertex.
which stationary item first made with bread and leather
An angle is made up of two intersecting lines, including their point of intersection.
when did people start bathing and what ruler made the law to bathe regularly