Pipe n tube are same in shape etc. BUT only difference is Pipe is used for Transferring Material (Gas, Liquid etc.) AND where it is used for Heat Exchanging purpose , It is called TUBE.
None. They both connote a slow gradual release of liquid. Seepage however requires the transmission of liquid through a substantive material .
Each fuse has its own rating. It will be marked on the fuse somewhere.
That would dependon the material (type of piping) and the the temperature of the liquid passing through
A fuse is used one time and replaced. A breaker can be re-set.
tungsten or sometimes copper
use of liquid nitrogen in refrigerator
a liguid laser in which an inorganic liguid such as nor neodymium-doped phosphorus chloride is used as the active material. Also known as neodymium liquid laser.---- or neodymium-doped phosphorus chloride is used as the active material. Also known as neodymium liquid laser.----
The material which is used in furance; boiler; fuse; regenerators;etc are called refractive materials.
If the solids can be made to form a suspension in a liquid, they can be separated in a centrifuge. Another technique, used in mineral analysis, is to float off the material in a dense liquid, such as Sodium polytungstate or similar. And with a powdered material, shaking tables are much used in industry.
If the solids can be made to form a suspension in a liquid, they can be separated in a centrifuge. Another technique, used in mineral analysis, is to float off the material in a dense liquid, such as Sodium polytungstate or similar. And with a powdered material, shaking tables are much used in industry.
solidifying.
If material is in liquid state the solvent is the liquid portion, the solute is the material being dessolved.
If material is in liquid state the solvent is the liquid portion, the solute is the material being dessolved.
If you know the density of the liquid, you could just weigh the material.
Usually such process is not reversible unless a special semi-liquid material is used.
If material is in liquid state the solvent is the liquid portion, the solute is the material being dessolved.