You would most likely measure a ribbon in inches for a small project. If you are talking about longer pieces, such as the amount on a roll, you could measure in feet or yards.
Depending on the nature and intended use of the piece, the most appropriate
unit might be the millimeter, centimeter, meter, or kilometer.
I think you should use inches. I learned that in math class and this is an easy question.
made by JACIE <3 ~!!!!!!!!!!!!!!!!!
Meters, centimeters, or millimeters.
yards
Measurement is how you measure something. for Example: i measured the desk and its 19 center meters long. That's my measurement of my desk.Definition: Measurement is collection of quantitative data. A measurement is made by comparing a quantity with a standard unit. Since this comparison cannot be perfect, measurements inherently include error.Examples: The length of a piece of string can be measured by comparing the string against a meter stick.http://sbmusicstation.blogspot.com/
When instead of measuring the specific thing directly you measure some other aspect of the event and from that figure out the actual value. Ex. Lets say that you need to find out the height of a tower, but that you can not measure it from top to bottom with a measuring tape. You can measure the shadow on the ground and with knowledge of the suns position and the angle of the shadow calculate the height of the tower.
Nail = 2.25 inches Ell = 45 inches (England) Ell (A measure which equals the length of a man's arm and varies from 55 inches (French) to 25 inches (Danish)) !
A metric ruler measures in inches and centimeters.
There are many instruments to measure lengths. But selection of measuring device depends on the maximum length it can measure. For example a small ruler used in schools can measure maximum 15 centimeters (or 6 inches). Here is a list of some measuring devices for measuring length: 1. Ruler (also known as scale) max 30cm 2. Meter Rod (that used by tailors or cloth sellers), max 100 cm 3. Measuring Tape (used by surveying engineers) For measuring very large distances travelled, In vehicles, speedometers also have distance measuring display. Ships use knots for measuring nautical miles.
-- Measure the length of the piece. -- Using a pencil, write the measurement on paper. -- Using skills taught in elementary school, divide the measurement by 2 . (Alternatively, multiply the measurement by 0.5 .) -- Using the result of your calculation, measure that length from either end of the piece.
Do what I do with my snakes - use a piece of string to get the approximate length from nose to tail - then lay the string on a ruler to get the measurement.
If 104 yards of ribbon is cut into 14 equal length pieces, each piece will have length of 7.43 yards, to the justified number of significant digits.
calculate
Circumference is the measurement around the trunk of the tree. It is usually measured at breast height because trees flare out at the bottom at different rates based on soil conditions. The best way to measure this is with a ribbon or piece of rope. Diameter can be measured by dividing this number by pi or 3.1415
Wrap the strip of paper around the plate or can and mark it where it completes a full circle around the object. Then lay the strip on a flat surface and measure the marked length using the ruler. That length is the perimeter (circumference) of the round object.
match it with a piece of string then measure the string
4 ÷ 2 = 2 so each piece measures two feet in length.
It is neither. Length is used to measure inanimate objects, such as the length of a piece of string or fabric.
The difference between a measurement and an estimation is that a measurement is an exact data while an estimation is a guess as to what something may measure. For example, you can use a ruler to get the exact measurements of a piece of paper. However, if you don't have a ruler, you can make an educated guess as to what the paper's length and width measurements may be.
Let x be the length measure of the shortest piece of wood, and 3x the length measure of the other piece of wood. So we have: x + 3x = 8 4x = 8 divide by 4 to both sides; x = 2 The length measure of the shortest piece of wood is 2.
I would use centimetres and millimetres