0
What else can I help you with?
What is min edge distance for fasteners?
The minimum edge distance for fasteners refers to the minimum distance from the center of a fastener to the edge of the material it is being installed in. This distance is crucial to ensure the structural integrity of the material and prevent issues such as splitting or tearing. Typically, the minimum edge distance is specified in engineering codes and standards, often ranging from 1.5 to 2.5 times the diameter of the fastener, depending on the material and application. Adhering to these guidelines helps maintain the strength and durability of the connection.
What is the shortest length on a meter stick?
The minimum length that a caliper can measure is 0.1 mm. While the minimum length that a micrometer can measure is 0.01 mm. permission; The most commonly used instrument for measuring length is the micrometer.
WHAT IS THE MINIMUM DISTANCE BETWEEN ANY TWO CORRESPONDING POINTS ON A WAVE THAT ARE THE SAME STAGE IN THE CYCLE?
The wavelength (denoted by Greek letter Lambda) is the minimum distance between any two corresponding points on a wave that are in the same stage of the cycle. This distance is usually measured from peak to peak (crest to crest or trough to trough). Wavelength is a distance and is usually measured in meters.
What minimum distance could be measured with inch ruler?
0.03125 = 1/32 inches.
Where is the minimum distance between two meridianswhy?
the minimium distance between the two meridians is at the poles because all the meridians comerge at the poles
What is the minimum height of a ladder required for me to reach the top of the roof?
To determine the minimum height of a ladder needed to reach the top of the roof, measure the vertical distance from the ground to the top of the roof. This measurement will be the minimum height required for the ladder.
What is the minimum distance allowed near open trenches when travelling a crane and why?
The minimum distance is the depth of the excavation...
What is the minimum seconds of following distance?
When following large trucks, maintain at least a minimum of a ______ second following distance.
Is there a rule of distance of school from billiard halls?
In the US there is no minimum distance. However, a local municipality can require a minimum distance by local code or ordinance.
Minimum distance below sink to trap?
What is the minimum distance between the bottom of a sink and the trap attachment for a bathroom sink
In a stationary fluoroscopy machine the minimum distance acceptable between patient and fluoroscopy tube should be what?
The minimum source-to-skin distance distance for a fixed fluoroscopy unit is 15 inches. For a portable x-ray machine, the minimum distance is 12 inches.
What is Jupiter's minimum distance from earth?
The minimum distance of Jupiter from Earth (i.e. the closest approach) is equal to about 588.5x10^6 km.
What is the minimum distance for a pool from septic tank field lines?
minimum of 10 feet
What is the minimum lethal distance of an uxo?
The minimum lethal radius of a UXO is 300 feet.
What Venus's minimum distance to earth?
Using average distances from the Sun the minimum distance is 1.0 - 0.7233 astronomical units, 0.2767 AU or 41.39 million km.But using the eccentricity of the orbits as well, the Earth's distance is 1.0±0.01672 AU, while Venus's distance is 0.7233x(1±0.00679) AU.Therefore the Earth's minimum distance is 0.9833 AU and Venus's maximum distance is 0.7282 AU. The difference is 0.2551 AU so the minimum distance from the Earth to Venus is 38.16 million km.
What is the minimum distance consider short?
Quark.
How do you find the minimum distance between two targets?
The perpendicular distance is the shortest.
