0
What else can I help you with?
What is the slope of the graph of versus for an ohmic material?
"Ohmic" means it obeys Ohm's law (V=IR, i.e., voltage = current x resistance). Since Ohm's law can be understood to be a definition of resistance, what this really means is that the material has a constant resistance. In such a case, the slope of current as a function of voltage will be a straight line passing through the origin.
What is the difference between Low OHIMC Distribution and High OHMIC Distribution?
Low OHIMC (Open High Impedance Microphone Circuit) distribution typically refers to a scenario where the circuit has a higher input impedance, resulting in less loading on the microphone and improved sensitivity, making it suitable for capturing quiet sounds. In contrast, high OHIMC distribution involves lower impedance, which can lead to greater noise and distortion but may be necessary for specific applications where robust signal strength is crucial. The choice between the two depends on the desired audio quality and application requirements.
What is the difference between an ohmic resistor and a non-ohmic resistor?
A non-ohmic resistor doesn't have a constant resistance. A ohmic resistor has a constant resistance.
What happens to the resistance of a common ohmic resistor when it is heated?
When a common ohmic resistor is heated, its resistance typically increases.
Is a ceramic resistor ohmic?
yes
Is the 10 ohm resistor ohmic or non-ohmic?
A 10-ohm resistor is considered ohmic if its resistance remains constant regardless of the applied voltage or current. Ohmic behavior indicates a linear relationship between voltage and current, following Ohm's Law (V = IR). If the resistance of the 10-ohm resistor remains consistent regardless of changes in voltage or current, then it can be classified as ohmic.
What is an example of an ohmic resistor?
i give the ans why iam asking you
What is the difference between ohmic and non ohmic elements?
An 'ohmic' resistor is one which obeys Ohm's Law. For Ohm's Law to apply, the resistance of a circuit must be constant over the range of incremental voltages applied to it. If the resistance changes over an incremental range of voltages, then it is said to be 'non-ohmic', and it does not obey Ohm's Law.
Is resistor an ohmic device in ac circuit?
Well, yes, sort of. "Ohm" is a measurement of resistance, so I would say yes. Although I'm not sure of 'ohmic' is really a word
How can you check if 50 mega ohms resistor is open?
use a merger tester, if there are no indication to certain number of ohmic (50 M), that is mean resistor is open.
What is the difference between resistor and metrosil?
A resistor is a passive two-terminal electrical component used to introduce resistance in an electric circuit. Metrosil is a type of resistor that is specifically designed to protect electrical equipment from overvoltage and lightning strikes by rapidly switching to a high resistance state when a voltage surge is detected. Essentially, Metrosil is a specialized type of resistor with specific protective properties.
Is Thermistor ohmic or non-ohmic?
no.....thermistors are not ohmic.
2 resistors unequal value are in parallel. Would the power dissipated by the resistor with larger ohmic value be greater than the power dissipated by the resistor of lesser value?
No, because the power dissipated in a resistor is proportional to the square of the current through the resistor but only directly proportional to the resistance of the resistor (I^2 * R) and the current through the lower value resistor will be higher than the current through the higher value resistor, the lower value resistor will usually dissipate more power.
What are ohmic and non - ohmic conductors?
ohmic conductor does obey ohm 's law. non ohmic conductor does not obey ohm's law.
