0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What size ac unit needed for a 1120 sq ft?
2.5 ton
What size ac unit is needed for a 1000 sq ft building empty?
if you have normal ceiling height(below 10ft) a 2 1/2 ton should be fine.
How much to install air conditioner for 5000 square foot room?
you will probably will require 10 AC 5000 sq feet room
Can you add an AC heating duct to the existing central AC unit in a 10ft x 16ft room you're building in the garage in a 2100 square ft home?
yes
Three points A B and C which lie on a level plane B is 7 km from A on a bearing of 030 C is 5 km from B on a bearing of 280 what is the distance of AC?
Approx 7.075 km.
What is the room size that the LG 7000 / 3850 - AC/ Heater works better in.?
This AC/Heater unit works best for a room size of 10 x 15.
What ac unit is appropriate for a 200 sqft room?
You want a about 8000btu for a room that size
How do you convert ac 240 to 280 ac?
260
What size ac unit needed for a 1120 sq ft?
2.5 ton
What size central ac unit is needed for 2200 sq ft house?
4 Ton
What size home would a 1.5 ton ac unit cover?
The size of room is enough wich is suitable for capacity of 1.5 Ton A/C The size of room is enough wich is suitable for capacity of 1.5 Ton A/C
What is the toneage of air conditioner for a 12X15 room size?
0.75 Ton AC is enough for this much area. 1 Ton AC = 12000 BTU, about 6000 btus are required for 12X15 room. hope info will be fruitful
What size ac condenser unit is needed for 1500 sq ft house?
4 ton
What size serpentine belt is needed to bypass ac on 1996 dodge caravan?
You can't bypass with a belt alone. You have to by a bypass pulley kit. The new pulley takes the place of the ac compressor and you use the same size belt.
How do you determine the capacity tonnage of a split AC required for your bedroom 12ft X 11.8 Ft?
The capacity of a split AC can be determined by a simple formula. The voltage of the AC connector and the size of the room are the two factors that determine the capacity.
What size of return is needed for 2.5 ton AC?
14'' is needed for a 2.5 ton system more return air the better air handlers are made to blow not suck....
How TO measure 280 volt?
Well you need a voltmeter and most will go up to 1000v. And will measure AC or DC. Also there are Clamp ON meters that you can use to clamp around the hot line-no probes needed. Be Careful.
