Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: What size drill for 10 mm coach screw?
Write your answer...
Still have questions?
magnify glass
Related questions

What size hole needs to be drilled for a number 6 screw?

#4 Screw use a 1/16" Drill #6 Screw use a 3/32" Drill #8 Screw use a 1/8" Drill #10 Screw use a 9/64" Drill #12 Screw use a 11/64" Drill #14 Screw use a 3/16" Drill

What size pilot hole do you drill before using the countersink bit in stainless steel?

I drill a pilot hole the size of the 'barrel' of the screw. -I always use a combination drill bit for sinking screwheads. The first part of the bit is the diameter of the 'barrel' of the screw and the step, one inch higher is the size of that screw's head. (The barrel is the diameter inside threads) -I have a set of these drill bits for #6, #8, and #10 screws and they are great.

What size drill bit for 10 metal screw?

It really depends on the material you are drilling. Thinner material will use a smaller pre-drill bit. Try drilling a sample hole on a piece of scrap or where it will not be visible Then try your screw. Adjust your hole size if necessary

How do you screw a wood screw?

You need to find out the size of drill bit you need - put the screw into a screw-bit rack and (going from the smallest to largest), the first one it fits in will be the right bitThen rill the hole, using a scrap piece of material (if appropriate)Then countersink the holeFinally, fitHope this helped, I've got to do this for DT homework

What size drill bit for 10mm?

10 mm would be ideal. But 13/32" will work.

What size is a number 40 drill?

A number 40 is 2.489 mm, or almost 1/10 of an inch.

What size of Allen wrench is used in a 10-24 set screw?


Where to get the best power tool bundle deal?

You can get a really good power tool bundle at, They have a drill, router, and a 10 peice screw driver bit set for $120. That is a good deal for such a good long lasting drill.

How is for-arm on Brazilian 4-10 shotgun removed after the head is gone and only threaded coming through solid metal cut the wood or drill the screw?

Take it to a gunsmith. There is a tool called an E-Z-out- looks like a coarse thread drill bit, with LEFT handed threads. The smith will use a milling machine to bore into the center of the screw, and use the E-Z-Out to remove the screw.

To replace two rocker studs on your 67 Chevy c 10 350 can you replace the two pressed in studs with screw in studs without removing the head?

if you can remove the broken studs without doing damage, you may be able to redrill the holes with the proper tap drill, and retap the hole for the screw in studs without removing the heads. careful you don't drill through the head, and get drill chips in the engine. i guess it depends on how good you do machine work.

What size drill bit to use for a 12millimeter wall plug?

Use a 1/4 inch bit, that's only very slightly bigger, less than 0.025 of a mm. larger.

What size is the torx screw head on the third brake light lens on a 1994 s-10?

It should be a number T15 or T20.