Double you answer for 2000 amps and for times your answer for 1000 amps.
amperes or A.
There's only one way to do that: Increase the current (amperes) in the wire.
30 amps is often the limit recommended for standard residential wiring on a #10 copper wire. You are correct.
Voltage is the "pressure" that pushes electrons thru a circuit, higher voltage means more current, or amperes. Amperes and the number of turns of wire in the magnet control the force of the magnet
In AWG wire sizes the smaller the number, the larger the wire.
Amperes is not constant like voltage. You can have .01 amps or 1200amps on a wire. Basic sizes of cable and their amp limits (for residential usage): 14ga. 15amps, 12ga. 20amps, 10ga 30 amps. It doesn't matter if its on 110V or 220V
720 C
amperes or A.
Standard Wire Gauge refers to a set of wire sizes.
There's only one way to do that: Increase the current (amperes) in the wire.
10 AWG
3 amperes. Ohm's law: Voltage is ohms times amperes.
22 will handle wire sizes 22-26 22D will handle wire sizes 22-28 22M will handle wire sizes 22-24
No. A #20 wire does not have the physical circular mils for a load of 30 amps. The wire would burn the circuit open.
Wire strippers come in a large variety of shapes, designs and sizes. There is no standard size. Wire strippers often come in a set with wire cutters and can be bought at home renovation stores.
Wire size is rated by Amperes of current. You did not mention the wire size of the aluminum wire, so there is no way to answer your question. The voltage rating is more a rating of how good the insulation around the wire is.
No, you can never mix wire sizes in a circuit.