0
What year was the Stevens model 311A savage arms corp chicopee falls Mass made with side by side and 10K circled double trigger all wood stock and forearm?
My sources tell me that production years are letter coded in the number letter combo stamped on the bottom of the reciever. Codes start with A = which equals 1949. I just picked one up stamped M and the listing said it was made in 1960. So I would guess that yours is circa 1959.
What else can I help you with?
What new technologies help trigger the industrial revolution?
The new technologies that helped trigger the industrial revolution where the modern steam engine and technologies that helped farmers plant more crops in a more organized fashion.
Are trigger locks good for the US?
If used properly, trigger locks are a valid safety device. If used improperly, trigger locks can be a hazard, and may even cause death. Some lock/gun combinations are actually more likely to discharge accidentally than an unlocked gun. Trigger locks by and large are useless against thieves, but can be used to control child access. If a firearm is kept for defensive purposes, a trigger lock is not an appropriate choice for access control and other options should be investigated. Since so much depends on the circumstances and the particular user, along with wide variety in lock and firearm designs, a definitive answer is not possible. As always, the ultimate safety is between your ears. Do not rely on the presence of a trigger lock. Do not assume the gun is not loaded. Do not assume it will not fire. Do not handle firearms you are not familiar with, just because they have a lock on them.
What wars did the Prussian invasion of silesia trigger?
meep.__. , seven years war
What new sources of energy helped trigger the industrial revolution?
The Steam Engine
What are some factors that could possibly trigger WW3 in the future?
There are a number of factors that could possibly trigger World War Three in the future. These include an attack by a nuclear-armed country as well as just general differences between countries.
How old is a Stevens 16 ga single shot?
look between the trigger and hair pin. see a number circled. that's how you tell.
What is the age and value of a 20 gauge J Stevens Arms Company Springfield side by side double barrel manufactured in Chicopee Falls Mass USA?
I too would like some information regarding a 20 gauge J. Stevens Arms Company 'Springfield' double barrel shotgun, the only other markings are 5000 on the right side plate and a circled 22 near the trigger guard.
How do you breakdown a Stevens 940a shotgun?
pull forearm off. open barrel and remove. drift 2 trigger assembly pins out. pull trigger ass. down and out. now drift the barrel catch pin and the lever and catch can be removed.
Where is the forearm on a rifle gun?
The forearm is the front part of the stock, under the barrel, that your NON-trigger hand holds.
You have inherited a shotgun marked choked bore pat applied for falls arms co chicopee mass with nitro special on the side and stamped kk947 behind the trigger can you tell you anything about it?
It was made by J. Stevens Arms (division of Savage Arms) sometime after 1920.
What is the value of a 22 caliber J Stevens Arms Company Chicopee Falls Massachusetts Favorite serial T157 single shot lever action rifle patented 1915 with a curled trigger guard?
it was a child's first gun. one in excellent condition is probably woth $100.00
How old is a 12-gauge pump Riverside Arms shotgun made in Chicopee Falls MA with four numbers on the trigger guard which are not legible except first one which is a 7?
Riverside Arms was a tradename used by Stevens and later by Savage. Would help to know what other markings are on the gun.
Where can you find information about a 20 gauge Stevens Model 530 double barrel marked with 14C in a circle by the trigger guard and Savage Arms Chicopee Falls Mass and a bird dog engraving?
The Blue Book says the No 530 was made from 1936 to 1942, but the 14C indicates manufacture in 1951.
Which trigger fires what barrel on Stevens 5100?
front trigger fires right barrel. back trigger fires left. boone
How do you disassemble a Stevens model 300 shotgun?
To disassemble a Stevens Model 300 shotgun, first ensure the firearm is unloaded by checking the chamber and magazine. Next, remove the forearm by unscrewing the screw located at the front of the receiver. Then, unscrew the trigger guard and remove it, which will allow you to take out the trigger group. Finally, you can separate the barrel from the receiver by unscrewing the barrel nut. Always consult the manufacturer's manual for specific instructions and safety precautions.
Where can you buy a trigger guard for a JC Higgins 101.7 shotgun?
Made by Savage/Stevens. We have trigger guards.
Where can you find a forearm stock for a Stevens 7J 12 gauge double-barrel hammer-trigger shotgun?
BETTER ANSWER Angels Gun Stocks Company has all Savage 311 series and types available. Stock and trigger guards are available. angelsgunstocks.com or angelsgunstocks@yahoo.com. If your local gunsmith can't help you could check with savagearms.com or e-gunparts.com.
