0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Do you have to run wiring in conduit if its in the ground?
Wire in conduit for underground feeders has to have an insulationrating for wet and damp locations. In the marketplace there is also wiring thathas an insulation rating for direct burial that does not need to be installed into conduit.
When installing surface mounted cable the best method of ensuring that it is kept straight is by?
When installing surface mounted cable the best method of ensuring that it is kept straight is by using more fasteners that is required by the electrical code. Another way is to install it into a conduit chase. The conduit can be fastened to the building using a level to keep it straight. The cable can then be pulled into the conduit.
What are the methods of laying in or drawing cables into conduit trunking and traywork systems?
Me, personally i use a horizontal bar above the area you are installing the cables into it is a lot easier than straight off of the floor...if the cable seems to tighten on the pole then just simply sprinkle some talk on it:)
Is it legal to support a conduit from another conduit of the same size?
No, the conduit has to be supported individually from a supportive structure. The spacing of the strapping is related to the size of the conduit.
What is the different between steel conduit over plastic conduit?
Steel conduit weighs more, provides more protection, and costs more than plastic conduit. Plastic conduit weighs less, is easier to work with, and costs less than steel conduit.
How much does it cost to install a wet bar?
Installing a new wet bar will cost you approximately $1443. However, the price may vary depending on the actual size of the wet bar and the area in which you're installing it.
What conduit can be used in all location?
There are many different kinds of electrical conduit. The reason for this is for cost, looks, and specific applications. An example of different applications might be: 1. An area where there is significant risk of mechanical damage. 2. An area where explosive vapours might be in the air. 3. An area where there is risk of corrosive chemicals. 4. An area where the equipment might have to be moved slightly or where vibration exists. 5. An area where the conduit is to be buried under ground. For most applications around a house I prefer to use PVC conduit (it is grey) It is good for mechanical protection, good in wet locations, relatively inexpensive and relatively easy to work with. PVC conduit can also be buried.
Do you have to run wiring in conduit if its in the ground?
Wire in conduit for underground feeders has to have an insulationrating for wet and damp locations. In the marketplace there is also wiring thathas an insulation rating for direct burial that does not need to be installed into conduit.
When installing surface mounted cable the best method of ensuring that it is kept straight is by?
When installing surface mounted cable the best method of ensuring that it is kept straight is by using more fasteners that is required by the electrical code. Another way is to install it into a conduit chase. The conduit can be fastened to the building using a level to keep it straight. The cable can then be pulled into the conduit.
Is garelochhead a wet area?
is garelochhead in argyll scotland a wet area
What is conduit wirimg?
Conduit wiring is simply wiring that you find in a conduit. Typically, a conduit is a small round tube, usually metal but sometimes plastic, that carries wires from one area to the next. Wire has a tenancy to sag and get tangled and such when it is laid out in long distances. The conduit serves to protect the wire and to ensure it stays linear and it stays in place.
What is the area of Wet Moor?
The area of Wet Moor is 4,910,000.0 square meters.
Is it wet or dry in the woodland area?
Its wet in places and not wet in places
What are the methods of laying in or drawing cables into conduit trunking and traywork systems?
Me, personally i use a horizontal bar above the area you are installing the cables into it is a lot easier than straight off of the floor...if the cable seems to tighten on the pole then just simply sprinkle some talk on it:)
Is it wet or dry in a low pressure area?
wet
Does breaker trip when circuit it is protectiong got wet?
Not unless the leakage current gets higher that what the trip setting of the breaker is. In many underground conduit systems the feeder conductors are in water continuously due to leaks in the under ground conduit system.
What is the area of Wet Beaver Wilderness?
The area of Wet Beaver Wilderness is 24.908 square kilometers.
