47
I don't believe there is a speed restrictor on the scooter. I own three and i checked them top to bottom. The speed is just limited by the gear ratio. Its about 35 mph with a stock scooter and a max of 40 mph with performance parts before the engine dies.
55-70mph is top speed of the scooter.
Take out the top speed restrictor plate. If you don't know how to do it contact a proffesional. where are the restrictor plates located
go to scootdawg.com forum, there is a great deal of info from other riders on what works and what dont work on increasing speed. do your homework before you start buying performance parts. go to https://www.pmtuning.co.uk/index2.htm you will find performance parts here, and you can ensure that they will fit your scooter before purchase. awesome article on making your Chinese scooter go 50mph! http://www.ehow.com/how_5096766_make-cc-scooter-even-faster.html
Regardless of whether it's wagon or not, the speed restrictor is known as a Governor.
Top speed for an electric razor scooter is around 10mph.
They would both be about the same for speed.
It can be removed via the 16 pin diagnostic socket, but i think you would need Ford to do it Although if it is a PSV then Ford will likely refuse to do this as the restrictor is a legal requirement.
There is no restrictor plate on this engine. Speed is controlled by the ECU.
A 300cc scooter will generally top out at around 85-90 mph.
The 250 cc motor scooter is commonly the largest engine size scooter. The 250 cc scooter has a top speed of about 75 miles per hour, but usually the engine size will top the speed out at about 60 miles per hour.
40-60 kph.
The maximum speed limit for a 150 cc scooter is around 60 mph. The size and weight of the rider plays a large part in the top speed.