0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Can we use servo way 68 instead of servo system 68 in hydraulic power pack?
No. Servo system 68 is hydraulic oil and servo way 68 is lubricant
What is densty of servo prime 46 lube oil?
0.874
Synchro motor and its function?
A Synchro Motor is a Elecrical motor consition out of a single-phase Inner/Rotor windings, and a Three-phase Outer/Stator windings. The Outer/Stator windings are connected Electricly in a Star formation. ... ie: The inner ends of each the three windings are connected to one another. And the outher ends will then be connected to another Synchro Motors outer ends. The Inner/Rotor windings are connected to a single-phase AC power supply. The Rotor Windings in turn transfer energy over to the Outer/Stator windings. The Stator Windings are 120 degrees appart. And therefore depending on the Rotation of the Inner/Rotor Windings the Outer/Stator Winding get a different magnatude of magnetic flux, transferring a different amout of current flow to each of the three Outer/Sator windings. That bring us to the use of a Synchro Motor: ... A Syncrhro Motor works in pairs of 2 or 3, and are used to transfer rotational oriantation from one Synchro motor to another. Depending on how the Synchro Motors are connected to one another you can mirror the rotation from the first motor to the second. For standard Synchronigation you would connect The 3 Outer/Stator windings as such (1-1) (2-2) & (3-3). To mirror the Rotation you could connect (1-2) (2-1) & (3-3). Remember I said you could have 3 Synchro motors... The Third is wired differently inside... it has 3 Inner/Rotor windings & 3 Outer/Stator windings. The Rotor & Stator winding are connected in a star formation. The third Synchromotor bring about a difference in rotation. You could add or subtract rotational oreantions. A = Synchro Motor 1 ...B = Synchro Motor 2 (with 3 Stator & 3 Rotor windings) ...C = Synchro Motor 3 A+B=C Or A-B=C Synchro motors are used in ships, for opening & clossing valves from the bridge to for instance the Engine room. A more advanced system of the synchro technology integrates with a Servo Motor, that in turn can controls the rudder of the ship. Other uses are in Analoge computers & Electronic Weapon Guidence Systems.
Can we use servo way 68 instead of servo system 68 in hydraulic power pack?
No. Servo system 68 is hydraulic oil and servo way 68 is lubricant
Do the brakes still work without the servo?
There are several types of brake servo and are we talking about unbolting it and throwing it away or do you mean if the servo is eleminated from the system? Most brake systems will work if the Brake Booster servo does not work. No braking system will work if you unbolt the servo and throw it away.
What is the SAE Equivalent of servo 68 grade oil?
Sae-20w
What is servo motor What are its applications in modern technology?
A servo mechanism is one where there is a control system, and actuator; and where there is feedback from the actuator to provide agreement with the control signal. The cruise control on your car is a servo system, for it senses the actuator's effect (road speed) and sends back a signal to the accelerator to adjust the car speed to the set target. Early servo mechanisms (but not the earliest) used an electrical motor, which was also able to send back information on its position. This feedback is the essential part of a servo mechanism. Probably the origin of the word is allied to "servant".
Do gas valves snap open and closed?
Purpose of the servo pressure regulator system
What are the applications for integrator circuits?
filter,servo control system,summing &difference application
Can drum brakes be servo or non servo?
They are either servo type or non servo type, they can't be both types.
What is a Micro Servo?
A micro servo is a small servo. The term can be used to describe any servo that is smaller than a "typical" servo. For example a servo that is about 1.5" x 1.5" x 0.5" would probably be called a micro servo. Most servos use the same signals and voltages, so usually a micro servo can be plugged into any servo controller or radio receiver that a regular servo can be plugged into.
How would you check that a hydraulic braking system vacuum servo is assisting foot brake pedal effort?
If a vacuum servo is fitted, then with the engine off, totally deplete the stored vacuum by repeatedly applying the service brake. Fully apply the brake and hold at a constant pressure. Note whether the pedal can be felt to travel further when the engine is started.
What is brake servo?
A brake servo is a servo that is used for brakes That's all folks
What is the birth name of Piero Servo?
Piero Servo's birth name is Servo, Giampiero.
What is a master cylinder?
It is the pump cylinder in a braking system, operated by the brake pedal and its assisting servo.
