The color red is used to indicate the level on a SITREP report that defines an area that has been reduced in strength. Green and amber indicate levels that are performing at or above expected strength.
This sitrep status in regards to personnel strength is red with reduced strength but the unit is still mission capable.
Purple: Reduced strength- 60 to 79 percent fit for duty; the vehicle and crew are mission capable.
On Line 6 of a sitrep, reduced strength of 80-89 percent is amber, 60-79 percent is red, and black is for less than 60 percent fit for duty.
Red indicates reduced strength 59% or less fit for duty.
A test coupon is loaded until non linear and then the load is removed. The yield point is defined as a certain percent strain elongation remaining as determined by a strain guage or extensometer. Usually, this strain is defined as 0.002, or 0.2%
A situation (SITREP) report is used by the army to analyze a unitÃ?s current and diplomatic position. Green is defined as 80% or more fit for duty/full strength, amber is 80-89%, red 60-79%, black 59% or less.
About 14 percent is capable for being farmed.
Green- 80 or more (full strength) Amber- 70-80% Red- 50-69% Black- 50% or less
The percent is a way of expressing he relationship between part and the whole, where whole is defined as 100%. A percent can be defined by a fraction with a denominator of 100. Decimals can also represent a percent. For instance, 56/100 = 0.56 = 56%
The strength of Venus Gravitational field is approximately 90 percent of Earth's.
Reading and writting.
20 to 50 percent
yes you definitly need 20+ signal
I don't think there is.
In welding, the ratio of the strength of a joint to the strength of the base metal expressed in percent.----
The ratio is 1:25 4 percent as a ratio is 0.04 : 1
about 95% of all animals can fly.
Absinthe ranges in strength from 45-75%