Simply because - due to the addition of heat, the water molecules in steam are further apart than those in cold water.
A meter is a measure of length. So a measure that is 1000 times larger than a metre would still be a length: it would never ever be a volume. So the question makes no sense.
The volume of a cylinder equals pi times the radius squared times the length, and there are 1000 cubic centimeters in a litre. Thus, 211.69 litres.
The volume is(1000)/(density of cement in kg/m3) cubic meters.
You divide by a million. milli means times 1/1000, kilo means times 1000.You divide by a million. milli means times 1/1000, kilo means times 1000.You divide by a million. milli means times 1/1000, kilo means times 1000.You divide by a million. milli means times 1/1000, kilo means times 1000.
1*1*1000
for converting cubic meter to ton , density or specific volume is needed. specific volume unite is m3/kg. steam cubic meter/ (cubic meter/kg)= steam (kg ) /1000= tone of steam
A meter is a measure of length. So a measure that is 1000 times larger than a metre would still be a length: it would never ever be a volume. So the question makes no sense.
A meter is a measure of length. So a measure that is 1000 times larger than a metre would still be a length: it would never ever be a volume. So the question makes no sense.
cherick is the best <3
About 1244 litres at STP, i.e. 1,244 m3. This is calculated by using the Avogadro's law and the ideal gas law, which gives that water vapor will have the molar volume of 22,414 litre/mol at STP (with temperature of 273.15 K, i.e., 0o C). The molecular mass of water is 18,02 g/mol and the mass of one litre is about 1000 g.
Volume = 1,000 cm3
The volume of a cylinder equals pi times the radius squared times the length, and there are 1000 cubic centimeters in a litre. Thus, 211.69 litres.
Weight = Volume times Density To answer this question the density of the rod has to be known, probably in Kg per Cubic Meter ( kg/m3) Volume of rod is Cross-sectional Area times Length Area for Square section rod is 19/1000 times 19/1000 = 0.000361 square meters Length is 1 meter Therefore volume is 0.000361 cubic meters Area for Round rod section is π*D squared / 4 or 22/7 * 19/1000*19/1000 / 4 = 0.000284 square meters. Length is 1 meter therefor Volume is 0.000284 cubic meters Weight is Volume times Density All units have to be compatible!
If you were to take a cube with a volume of 1 m3 and filled it with water, 1000 L of water would fill it exactly. 1dm3 is 1l. This 10(1m) times 10 times 10 is 1000.
The volume is(1000)/(density of cement in kg/m3) cubic meters.
No its 1000 times smaller if you meant millimeters. Millilitres are volume measurements and 1000ml equals 1 litre. 1000 millimetres equals 1 metre.
It has a volume of 1000 cubic centimeters, which is 1000 milliltres or 1 liter. There is no such thing as a cubic milliliter