Want this question answered?
It is the amount if current it takes for unit deflection in the given galvanometer. k = I/theta Where k is the figure of merit, I is the current supplied and Theta equals the number of divisions of deflection.
Degrees
Contours for a gentle slope are spaced equally and far apart, the closer the contour lines the steeper the slope.
reduction factor is used to find earth's magnetic field and compare galvanometer constants
IG=Betanx. in this G is G.constant, I is current, Be is Megnetic field of earth, OK? or anything else?
Four:One each vertical and horizontal divisions along the centerlineTwo diagonal divisions from corner to cornerThree horizontal division equally spacedThree vertical divisions equally spaced
It is the amount if current it takes for unit deflection in the given galvanometer. k = I/theta Where k is the figure of merit, I is the current supplied and Theta equals the number of divisions of deflection.
Degrees
equally spaced along both sides
At equally spaced intervals that suit your lifestyle.
Traid colors are the schemes use three colors equally spaced on the color wheel.
It is a non-linear device.
They are more or less equally spaced. The size of the nodes span from 1–2 µm whereas the internodes can be up to (and occasionally even greater than)1.5 millimeters long, depending on the axon diameter and fiber type.
462
What is the difference between the construction of a moving coil galvanometer and a ballistic galvanometer?
they should be equally spaced...but You should be able to find a shop manual at your local library with the right info...make copies as they are usually only in the REFERENCE section....good luck:)
Its a point on the galvanometer where the galvanometer shows no deflection as no current passes through it.