0
The strength of a electrical flow is measured in Voltage and Electrons are negative.
Alternating current (AC) oscillates between positive and negative as the direction of flow periodically reverses direction. An alternating current of 60Hz therefore changes direction 60 times a second, and can be visualised as a sine wave that oscillates above and below the zero baseline, with a period (a complete cycle) of 1/60th of a second.
Direct current (DC) infers constant polarity, meaning the direction of flow is unidirectional (one direction only). While DC can oscillate as a full-wave rectification or a half-wave rectification, it is always indicated as a positive voltage (the line or wave is always above the zero baseline).
A voltage or current indicated with a negative symbol therefore implies alternating current although AC is more correctly indicated by the ± symbol. Direct current is generally indicated by a long horizontal bar above three short horizontal bars.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
Which are the positive and negative?
The ones with the + sign are positive. The ones with the - sign are negative.
When you multiply a negative by a positive what sign do you get?
You get a negative.
What is the sign for positive divided by negative?
negative
What are the meanings of positive and negative reduction potentials?
the meanings of positive and negative voltage
Is the product of 33 negative numbers and 2 positive numbers a positive number or a negative number?
(The product of 33 negative numbers) x (2 positive numbers) = (negative sign) x (positive sign) = negative sign
Why during measurement the measured voltage and currents have negative sign?
Because of the polarity of the circuit. The signs of measured current and voltage depends on the direction of the current and voltage.
Is percent voltage regulation can be negative?
yes.. voltage regulation can be negative
What is negative 48 volt DC voltage?
Negative 48 volt DC voltage is simply a voltage that is negative 48 volts with respect to ground. This voltage is widely used in telecommunication systems.
Is voltage negative or positive?
A negative or positive sign is applied to a current depending upon the direction in which it is moving, and in the case of alternating current, that direction changes 60 times per second. Viewed strictly as a form of energy, voltage is always positive. So far, physics has not detected negative energy.
What dos the voltage sign mean?
The voltage sign is V which mean volt
Does the negative sign come before or after the dollar sign?
Does the negative sign come before or after the dollar sign?The negative sign comes before the dollar sign.
How do you get negative voltage from transformer?
The term, 'negative voltage', refers to its direction and has nothing to do with 'negative' in the 'charge' sense. It's used to indicate the direction in which a voltage is acting in relation to another voltage ('positive' if acting in the samedirection; 'negative' if acting in the opposite direction). So your question is confusing: 'negative' in relation to what?
What is the significance of negative values of voltage and current?
What is the significance of negative values of voltage and current?Negative values show direction and that is the significance
What will happen when the terminal of the volmeter are inversed and used to read the voltage of the DC supply?
Depends on the voltmeter. Some meters will display a positive voltage no matter how the leads are attached to the source. Others may indicate a negative voltage if leads are reversed.Another AnswerAn analogue voltmeter will always read downscale (i.e. 'backwards') if connected the wrong way around.Digital voltmeters generally indicate the correct voltage, but display a negative sign to indicate that the polarity is the wrong way around.Don't forget, when we say 'negative voltage', we are referring to its direction. Voltage, which is simply another word for 'potential difference', and it cannot be positive or negative in the sense of 'charge'.
Why telephone line has negative voltage?
A negative live voltage is used to prevent electroytic corrosion on the copper wires.
Which are the positive and negative?
The ones with the + sign are positive. The ones with the - sign are negative.
When measuring voltage how should test probes be connected?
First connect the positive terminal of the voltage line to positive terminal of multimeter and negative to negative terminal of multimeter. Select voltage in multimeter and measure the voltage
