0
Why won't a three way lamp switch work with a wall controlled outlet?
Wiki User
∙ 12y ago
Not wanting to state the obvious but the wall switch has to be turned on to supply voltage to the outlet. The lamp will need a three way light bulb in the lamp. A three way bulb uses two filaments of different lengths. One element is used for low brightness, the other filament for medium brightness and the high brightness setting uses both filaments in the bulb. If a single filament ordinary light bulb is used in place of a three way light bulb there will be a position on the three way lamp switch where the bulb will not light. Find the position on the lamp where the bulb will light and leave it there. Use the wall switch to turn the lamp off and on through the controlled receptacle.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
Why won't a three way lamp switch work on all three settings when used in a outlet controlled by a wall switch?
If the wall switch is on, the three way lamp switch should work. If it doesn't, it may be broken or there may be something else wrong with the circuit.
What is three way switching?
A three way switch is use control in two station of the lamp
When installing lights with 2-way and intermediate switching control the intermediate switch must be connected to the?
to wire a lamp to be controlled from three places you need two three way switches and one four way switch. the two traveller wires that would normally run between the two three way switches must be connected to the terminals of the four way switch
A lamp is to be controlled independently by switches in two different locations?
It is called three way switching.
How do you wire a candelabra lamp to a three way switch?
A candelabra lamp fixture is the same as any other lamp fixture. Using a three way switching system can be followed by the related links.See related links below.
Why won't a three way lamp switch work on all three settings when used in a outlet controlled by a wall switch?
If the wall switch is on, the three way lamp switch should work. If it doesn't, it may be broken or there may be something else wrong with the circuit.
How do you know which outlet is controlled by a switch?
Plug a lamp into a working socket of an outlet to ensure the lamp works. Then turn off the switch and plug lamp into all outlet sockets, top and bottom outlets until the lamp doesn't light. Then turn on the switch and the lamp should light. Often a switch in a bedroom is only connected to one socket in a duplex outlet. It is possible to remove a jumper in an outlet to isolate the sockets for just this purpose. Often an electrician will install the outlet upside down (The third prong pointing up, to identify the outlet.
How do you run a light with a switch from a existing outlet with out controlling the out let with the switch?
Break off the tab that jumps between the wire mounting screws on the side of the receptacle. This turns one receptacle into 2 seperately controlled parts--one is always hot and the other is controlled by the switch (the one with the lamp plugged in).
How do you control a lamp from three different positions?
we use 2-3way switch and 1-4way switch
What is three way switching?
A three way switch is use control in two station of the lamp
When installing lights with 2-way and intermediate switching control the intermediate switch must be connected to the?
to wire a lamp to be controlled from three places you need two three way switches and one four way switch. the two traveller wires that would normally run between the two three way switches must be connected to the terminals of the four way switch
A lamp is to be controlled independently by switches in two different locations?
It is called three way switching.
How do you wire a candelabra lamp to a three way switch?
A candelabra lamp fixture is the same as any other lamp fixture. Using a three way switching system can be followed by the related links.See related links below.
How does a bedside lamp work or function?
The same as any other light. The plug is inserted into the wall outlet which inturn supplies power to the switch. If the switch is in On, current will flow to the bulb. this causes the light to come on. When the switch is turned off, the current stops there.
A three way switch is what type of switch?
A three way switch is one of two devices that is used in operating a load from two different positions. This type of electrical circuit is known as three way switching. This terminology is used in North America, in Europe and the UK this type of switching is known as two way switching.
What is a keyless lamp holder?
A lamp holder that turns on from a wall light switch not a switch on the device.
If lamp switch is ON and if you remove the lamp bulb we still wasting electrict?
no because when you remove the lamp the circuit is still open; even if the switch is on
