0
not same block , 5.8 is longer stroke , same bore , bigger block, heads, cam and water pump will interchange
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
What is one fourth of 46?
one fourth, is the same as one quarter. So you will need to do 46 divided by 4 is 11.5 one of 46 is 11.5
How many feet are in46 feet?
Feet and feet are the same measurement. Therefore, 46 feet is equal to 46 feet.
What is the grade 46 out of 52?
You would divide 46 by 52 and then multiple by 100 to find the percent. The grade would be an 88 if all the questions are worth the same amount.
What is another way to write nin times 46?
There are three options that pop up immediately: 1). 9 x 46 2). 414 (the result of the multiplication) 3). " nine time 46 " (the same phrase, only spelled correctly)
What is 46 plus 46 equal?
46 + 46 = 92
What transmission is in a 1998 ram 1500 5.2 liter two wheel drive?
The automatic is a 46 RE.
What transmission is in a 1996 dodge ram 1500 5.2 liter?
Auto is a 46 RE Manual is a NV3500
What transmission does a 1995 dodge ram 1500 5.9 Liter have?
Auto is a 46 RH manual is a NV 3500
What type of transmission comes in a 1998 dodge ram 1500 5.2 liter 2 wheel drive?
Auto is a 46're Manual is a nv 3500
How much is 46 liter?
46 l = 12.152... US gal
Will a 1997 dodge 46 re transmission interchange with a 1996 dodge 46 re transmission?
Yes
How much does 46 liter equals a millimeter?
These are incompatible units. Liter is volume (3 dimensions) millimeter is linear (1 dimension).46 liters is 46 million cubic millimeters
Was ist 46 cl in liter?
46cL = 0.46L* There are 100cL per liter
Will a 46 re transmission interchange with an a518 transmission?
No, the 46 RE has an electronic governor, while the A518 has a mechanical governor.
How many cubic inches is the 46 liter motor?
46 liters equals - 2807 cuin. If you meant the 4.6 liter mustang motor is 281 cuin.
What are the cylinder head torque specs and torque sequence on a 01 s10 2.2l?
Tighten the long bolts to 46 ft/lbs. Tighten the short bolts to 43 ft/lbs. #1 is between cyl 2 and 3 (middle bolt, long), pushrod side. 46 ft/lbs #2 is middle short bolt. 43 ft/lbs #3 is short bolt between cyl 1 & 2 43 ft/lbs #4 is long bolt between cyl 1 & 2 46 ft/lbs #5 is long bolt between 3 & 4 46 ft/lbs #6 is short bolt between 3 & 4 43 ft/lbs #7 is short bolt at front 43 ft/lbs #8 is long bolt at front 46 ft/lbs #9 is long bolt at rear 46 ft/lbs #10 is short bolt at rear 43 ft/lbs "After this, (using torque angle meter) tighten in same sequence another 90 degrees."
What is head bolt tighting sequence for 2.2 Chevy 1994 model?
Always start from the center and work your way out. Kind of like in a circular motion but the circle gets bigger & bigger. # Tighten bolt 1 to 63 N·m (46 lb ft). # Tighten bolt 2 to 58 N·m (43 lb ft). # Tighten bolt 3 to 58 N·m (43 lb ft). # Tighten bolt 4 to 63 N·m (46 lb ft). # Tighten bolt 5 to 63 N·m (46 lb ft). # Tighten bolt 6 to 58 N·m (43 lb ft). # Tighten bolt 7 to 58 N·m (43 lb ft). # Tighten bolt 8 to 63 N·m (46 lb ft). # Tighten bolt 9 to 63 N·m (46 lb ft). # Tighten bolt 10 (stud bolt) to 58 N·m (43 lb ft).
