Best Answer

Depending on the deminsions it should absoloutly. Assuming the dimensions are apx 14X14 you have a very large room. My present room is only 13X11 (143 sq ft) and it fit a king bed, and a ton of furniture, and a whole wall was dedicated to closet doors.

Q: Will king bed fit in 200 square foot room?

Write your answer...

Submit

Still have questions?

Continue Learning about Math & Arithmetic

200 square feet is correct answer.

It depends on what kind of carpet you get and what the cost of it is per square foot. Also, if you do it yourself or if you will hire someone to do it. You are talking about 200 square feet, so find the cost per square foot and figure 200 x cost per foot.

10 ft x 20 ft room = 200 square feet

Each paver is 12" x 12" or 1 square foot. So, 200 ft2 * (1 paver/ 1 ft2) = 200 pavers

1 200 square centimeter = 1.291 669 25 square foot

Related questions

A 200 square foot room costing $450.00 costs $2.25 per square foot. 450 / 200 = 2.25

There is not sufficient information to answer the question. Saying that the room is 200 foot long conveys no information at all on its width and, therefore, on the area that needs to be covered by the tiles.

First, find out how many square feet are in the room. 20 X 30 = 600 Then, a square yard is equal to three square feet so divide the square feet by three. 600 / 3 = 200 The answer is 200 square yards. You are welcome.

200 sq ft = 18.58 square metres200 sq ft = 18.58 square metres200 sq ft = 18.58 square metres200 sq ft = 18.58 square metres

200 square feet is correct answer.

200 square meters is about 2,152.8 square feet.

144 assuming no waste.

It depends on what kind of carpet you get and what the cost of it is per square foot. Also, if you do it yourself or if you will hire someone to do it. You are talking about 200 square feet, so find the cost per square foot and figure 200 x cost per foot.

Percentages are used when comparing two things. I'll give you an example: You have a piece of carpet and a room to put it in, and you want to know what percentage of the floor the carpet will cover. The carpet is 100 square feet, and the room is 150 square feet. The formula is: (square footage of the carpet / square footage of the room) x 100 100/150 is .6667; multiply that by 100 to get 66.67 percent. If you want to carpet the room wall-to-wall, you need more carpet. OTOH, if you have a 200 square foot carpet and a 100 square foot room... (200/100) x 100 = the carpet is 200 percent of the size of the room, and you'll have to cut half of it off.

A board foot is 1' by 1' by 1", so it is 200 square ft 1 inch thick.

$200 per square foot

The area of each tile is 16*16 sq inches = 1.77... square feet. To cover a 200 square foot square will require 200/1.77... = 112.50 = 113 tiles.