0
5”
What else can I help you with?
What is the Hypotenuse of a 90 degree triangle with two nine inch sides?
The hypotenuse of a 90-degree triangle with two nine inch sides is: 12.73 inches.
What has a 12 inch blade that moves through a head that is marked with 45 degree and 90 degree angle measures?
A combination square
What is the height difference for an angle of 1 degree for a length of 6 feet?
It should be approximately 1.26 inches, or 1 1/4 inch to the nearest quarter inch. The tangent of an angle of 1 degree is 0.17455 times the 6 foot base is 0.10473 feet.
What is the angular size of circular object with a 2 inch diameter viewed from a distance of 4 yards?
It is 0.8 degrees.
Take off of an eight inch pipe with a 45 degree angle?
this app help you: "Miter Flat Pattern Design" in play.google.com
What is take off for 18 inch 45 degree fitting?
11 1/4"
What is the take off for a 10 inch 67 degree fitting?
9 15/16"
What is the cut off measurement of a 90 degree pipe fitting?
pipe size(inch)x38.1
What is the take off measurement for a 8 inch victaulic 45 degree fitting?
The take-off measurement for an 8-inch Victaulic 45-degree fitting is typically around 7 inches. This measurement is used to determine the distance from the centerline of the fitting to the point where the pipe will be cut or connected. However, it's essential to consult the manufacturer's specifications or installation guidelines for precise dimensions, as they can vary slightly.
Where to locate fuel filter on 1984 Chevy c10 truck?
If you look at the front of the carburetor you will see a medal line that is screwed into a 1 inch fitting. You will need to remove the line from the fitting with a 5/8 wrench and then remove the 1 inch fitting and the filter will be behind that fitting.
Is there a fitting to go from 34 of an inch iron or lead pipe to 1 inch copper?
YES there is
Where is fuel filter on 1978 Chevy K-10 Silverado?
If you look at the front of the carburetor you will see a big medal line screewed into a 1 inch fitting, the line is a 5/8 fitting and the filter is behind the 1 inch fitting.
What is the standard hose fitting size for this particular application?
The standard hose fitting size for this application is 3/4 inch.
Fitting Peugeot 106 speakers?
5 inch (13 cm)
Where is the fuel filter located on a 1972 Camaro?
It is located behind the big fitting that the fuel line goes to and it requires a 5/8 inch wrench for the fuel line and a 1 inch wrench for the fitting.
What is the standard thread size for a 1/8-27 NPT fitting?
The standard thread size for a 1/8-27 NPT fitting is 1/8 inch in diameter with 27 threads per inch.
When 3 inch original sewer pipe is at the street can 4 inch be reduced to tap into it?
Yes. A reduction fitting can be used.
