Watts = Amps x Volts. 60 x 240 = 14400
30X240=7200
2.3 kw per hour on a 110-120 volt circuit.
The load exceeds the limit of the breaker or fuse. For example a 20 amp breaker on a 120 volt circuit will handle 2400 watts. Exceed that wattage and the breaker will trip or the fuse will blow.
At 120 volts a 15 amp breaker can be loaded to 1800 watts before it will trip. If it is a continuous load then the electrical code states that it is only allowed to be loaded to 80%. This will be 1800 x .8 = 1440 watts. If the voltage is not 120 volts use the following equation Watts = Amps x Volts. Amps being the breaker size that is to be used.
The equation that you are looking for is I = W/E. Amps = Watts / Volts.
30X240=7200
2.3 kw per hour on a 110-120 volt circuit.
The maximum wattage that a 30 amp breaker can handle is 30 x 230 = 6900 watts. Other variables come into play and this number will decrease depending on the load, duty time, and difference in voltage fluctuation.
The load exceeds the limit of the breaker or fuse. For example a 20 amp breaker on a 120 volt circuit will handle 2400 watts. Exceed that wattage and the breaker will trip or the fuse will blow.
At 120 volts a 15 amp breaker can be loaded to 1800 watts before it will trip. If it is a continuous load then the electrical code states that it is only allowed to be loaded to 80%. This will be 1800 x .8 = 1440 watts. If the voltage is not 120 volts use the following equation Watts = Amps x Volts. Amps being the breaker size that is to be used.
The equation that you are looking for is I = W/E. Amps = Watts / Volts.
1440
To answer this question a voltage must be given. Watts = Amps x Volts. <<>> Answer At 115 volts ac, 30 amps equals 3,450 watts.
20-amp breakers can be found for many different voltage levels. The higher-voltage ones tend to be more expensive. A breaker can be used in a circuit of equal or lower voltage than the rated voltage of the breaker.
This speaker is 500watts max.
Watts = volts x amperes. So if your region uses 110 volts, 20 amperes is equivalent to 2200 watts; if your region uses 220 volts, 20 amperes is equivalent to 4400 watts.
Speakers are measured in Ohms not Watts. Watts is the amount of power you will be supplying to the speakers. In my 2009 Corolla the speakers can handle at least 400 Watts as this is what my OEM JBL system is pushing.