0
Steel post of 100 mm x 100 mm x 10 mm thick x 3.4 long . What is the weight in kgs?
If the length is in meters (all the other measurements are in millimeters but if the length were also mm that would be a short post...)
The volume of the square post in cubic centimeters is:
4 * 9 * 1 * 340 = 12240
the density of much construction steel is around 7,8 g/cm3
So 7,8 * 12240 = 95472 grams or 95 kilograms
You probably do not want to carry that by yourself
What else can I help you with?
What is the postage rate for a letter more than one fourth inch thick?
It depends on which country you are in and where you want to post it to!
How much does a 8 x 8 cedar post weight per foot?
An 8 x 8 cedar post typically weighs around 2.5 to 3.5 pounds per foot, depending on the specific type of cedar and its moisture content. Therefore, for an 8-foot post, the total weight would range from approximately 20 to 28 pounds. Always consult with your supplier for the most accurate weight based on the specific product.
How many fence post needed to fence 18 meters?
It depends on what kind of fence you wish to put up. For example, an electrified barbed wire and steel post fence would only require about three posts. But a wood plank and wood post fence would require about five or six.
How much does a 6 X 8 treated post weigh?
A 6 x 8 treated post typically weighs between 60 to 80 pounds, depending on the moisture content and the specific type of wood used. The weight can vary based on the treatment process and the density of the wood species. It's always a good idea to check with the supplier for the exact weight of the post you are considering.
Is a post it note 1 cm long?
No, a standard Post-it note is not 1 cm long. Typically, a standard Post-it note measures 7.6 cm x 7.6 cm (3 inches x 3 inches). There are smaller versions available, but even the smallest Post-it notes are generally larger than 1 cm.
How does thick padding around the goal post reduce injuries to players?
A player slams into padding instead of slamming into a steel post.
How much does a galvinized schedule 40 steel post 9 ft long weigh?
Need diameter as well.
Why is there reinforcing steel in concrete?
Reinforcing steel is inserted into concrete structures to add some strength under tension. Concrete is strong under compression: it can take a lot of weight that is trying to compress or squash it, but it is not strong under tension. Steel is strong under tension. Imagine a concrete post or column. If it is stood vertically a heavy weight can be placed on it without any damage to it even if it is quite thin and narrow. Each part of the column all the way up its length, even though only small in area, can bear the weight because it is a compressive force. Now picture the same concrete post poking horizontally out from a cliff face. If a heavy weight is hung on the outer end of the post the weight will be pulling down trying to bend it. This puts the top of the post under tension: it is trying to stretch to form that bend, and the bottom face of the post is under compression. A heavy weight will take the concrete at the top side of the post beyond the amount of tension it can resist. If we could watch the failure in slow motion, we would see the crack start at the top and travel through the post until it broke completely. If the post had reinforcing rods of steel within it, the steel near the top face would provide the tensile strength so that a much larger load could be borne by the post under tension. In buildings these tensile loads can be found in beams, and in columns under side loads such as wind and earthquakes.
What amount of force is needed to bend a steel fence post?
The amount of force that is needed to bend a steel fence post depends with the steel post in question. The force that is required is therefore calculated based on the material in question.
How much does a 8 foot long 6 by 6 post weight?
Different woods will have different weights. On average, the post will weigh about 54 pounds.
When was the steel fence post invented?
1913
What are horseshoe courts made of?
Horseshoe courts are long boxes of sand with a thick metal post at one end and players try to throw horseshoes and have them land around the post at the other end. They are made of sand.
Is a steel post made of tiny particles?
yes. everything is made of tiny particles.
Who invented a steel fence post in 1926 that was named after them?
The steel fence post invented in 1926 was named after its creator, John W. McFadden. His design revolutionized fencing by providing a durable and long-lasting alternative to traditional wooden posts. The McFadden post quickly gained popularity in agricultural and residential applications due to its strength and resistance to weathering.
What are the release dates for Buns of Steel Pregnancy Post Pregnancy - 2012?
Buns of Steel Pregnancy Post Pregnancy - 2012 was released on: USA: December 2012
What are the best materials to use for creating a durable and long-lasting concrete fence post?
The best materials for creating a durable and long-lasting concrete fence post are high-quality concrete mix, steel reinforcement bars, and proper curing methods.
How much to post a coat to Ireland from UK?
There is no simple answer to that. It will be based on the size and weight of the package. That can only be done at the post office.There is no simple answer to that. It will be based on the size and weight of the package. That can only be done at the post office.There is no simple answer to that. It will be based on the size and weight of the package. That can only be done at the post office.There is no simple answer to that. It will be based on the size and weight of the package. That can only be done at the post office.There is no simple answer to that. It will be based on the size and weight of the package. That can only be done at the post office.There is no simple answer to that. It will be based on the size and weight of the package. That can only be done at the post office.There is no simple answer to that. It will be based on the size and weight of the package. That can only be done at the post office.There is no simple answer to that. It will be based on the size and weight of the package. That can only be done at the post office.There is no simple answer to that. It will be based on the size and weight of the package. That can only be done at the post office.There is no simple answer to that. It will be based on the size and weight of the package. That can only be done at the post office.There is no simple answer to that. It will be based on the size and weight of the package. That can only be done at the post office.
