It depends on how thick the copper part of the wire is. A good guide is 5 amps per square millimetre of cross-section, less for a permanent installation.
<<>>
There are two factors that have to be taken into consideration when talking about wire. When amperage is talked about, that is the capacity of the wire to carry the current of the load, which is discussed above. When wire voltage rating is talked about, that is the resistance factor of the insulation wrapped around the wire to withstand the voltage that is applied to the wire. The higher the applied voltage to a wire, the higher the insulation rating has to be. Most conductors fall into three categories, 300 volts, 600 volts and 1000 volts. The 300 volt rating covers home wiring as it will never get above 240 volts. The 600 and 1000 volt rated wire is usually reserved for industrial installations.
AWG # 6 copper wire will carry 55 amps for service entrance wiring.
70 amps.
18 amps.
Need to know the wire size.
6 AWG
A #8 copper wire with an insulation rated at 75 or 90 degrees C is rated at 45 amps.
50 amps.
140 AMPS
70 amps.
Aluminum 4/0 wire car carry 180 amps at at 75 degrees Fahrenheit or 205 amps at 90 degrees. .
If you mean 2/0 copper wire it is rated 175 amps. # 2 wire is 115 amps. If you are referring to 2.0 metric it is rated 15 amps.
18 amps.
A wire with the stats 14awg and 105 degrees Celsius can carry up to 39 amps.
Need to know the wire size.
6 AWG
30 amps is how much a 10-2 wire will carry at 110 feet. 10 gauge wire is only good for thirty amps per the national electrical code. Using 80% of the breakers usage you will actually be getting only 24 amps.
Yes, a #10 wire will carry 30 amps for 30 feet. If the load is rated as continuous then the wire will have to be derated to 80% capacity which will leave you with 24 workable amps. If the load demands currents higher that 24 amps then you will have to go to the next wire size up which is a #8 which is rated at 45 amps.
A #8 copper wire with an insulation rated at 75 or 90 degrees C is rated at 45 amps.