0
Connect the white and black wires back on to where the other black and white wires connected. There should also be a green pigtail coming out of the fixture which will be the ground. If it has a chain, then the wire running through the chain will be the ground wire.
Add your answer:
Earn +20 pts
How do you replace an old light fixture with two sets of black white and ground wires with a new fixture that only has one set of black white and ground wires?
Connect black to black and white to white from the switch. Your old fixture may have had wiring for multiple bulbs so they could be switched separately.
Do you connect both wires on a pull chain switch one to black one to white?
There should be two wires in the box, black and white and possibly a bare one depending on the age of the wiring in the house. The fixture has two screws on the base. One wire goes on each screw. If there are short wires on the fixture, black to black and white to white. If there is a bare ground wire in the house box, it attaches to the body of the fixture. If there is no ground screw on the fixture, do not worry about it.
What color screw does the black wire attach in a porcelain light fixture?
If there is a brass colored screw and a silver colored screw, the BLACK wire will connect to the brass screw. If you can't see a difference, connect the black wire to whichever screw connects to the CENTER contact of the light fixture.
How do you wire 6 recessed fixtures in succession on a 3 way switch?
If you already know how to put one fixture on a 3-way, just connect white-to-white and black-to-black from one light to the next. If you're changing from a single switch to the 3-way, the exact wiring will depend on whether the power comes from the breaker box to the switch or the existing fixture. I'll assume you're starting from scratch or have the power going to the fixture. You need #15 two-wire with ground and #15 three-wire with ground romex. Run two-wire from the breaker box to the first light fixture. Pull a another two-wire from this box to switch A and a three-wire between the switches. String two-wire from the first light to the second, second to third, etc. In the first box, connect white from source to the white fixture wire and the white going to the second box; black from source to the black to switch A; and the black fixture wire to both the white to switch A and the black to the next fixture. At each of the other 5 fixtures, connect all white to white and black to black (three pair in each box except the last one). At switch A, connect the white from the fixture to the common (center) connector and the black directly to the black going to switch B. The red and white wires going to switch B are connected to the two outside connectors of switch A. At switch B, the black goes to the common connector and the red and white to the outside connectors. At each box, connect all the bare wires (second ground) to each other and to the fixture or box. Now turn the power back on. If all the connectors are tight, power should follow the black wires from source past the fixture and switch A to switch B. From there it will go through one or the other of the travellers and, if switch A is in the same position as B, up the white switch leg to the fixtures, turn on all the lights and go back to ground.
Outside porch lamp has no box just two wires coming in black wires are tied and don't connect to fixture just the white wires what is going on here?
You would have to provide more info to be certain what your problem is. Typically a black and white wire would connect to the two wires on the light fixture. The fixture should also be controlled by a switch that "breaks" the black (Hot Wire) to turn off the fixture. If you have a volt meter you can see if there is 120Volts between the black and white wires with switch on. If there is a single white wire going to fixture (Neutral), where is the "black wires tied" to. Maybe one of the black wires has broken off the fixture.
Can you run power from a light fixture to another light fixture?
Yes. Connect Black to Black, White to White and bare ground wires together.
How do you replace an old light fixture with two sets of black white and ground wires with a new fixture that only has one set of black white and ground wires?
Connect black to black and white to white from the switch. Your old fixture may have had wiring for multiple bulbs so they could be switched separately.
How can 5 fluorescent lights be connected together?
Connect them in parallel. The black wire from the ballast to the black line wire. The white wire from the ballast to the line neutral. Connect the ground wire to the ground screw which is located in the body of the fixture. Grounding of the fixtures is essential.
Do you connect both wires on a pull chain switch one to black one to white?
There should be two wires in the box, black and white and possibly a bare one depending on the age of the wiring in the house. The fixture has two screws on the base. One wire goes on each screw. If there are short wires on the fixture, black to black and white to white. If there is a bare ground wire in the house box, it attaches to the body of the fixture. If there is no ground screw on the fixture, do not worry about it.
What color screw does the black wire attach in a porcelain light fixture?
If there is a brass colored screw and a silver colored screw, the BLACK wire will connect to the brass screw. If you can't see a difference, connect the black wire to whichever screw connects to the CENTER contact of the light fixture.
How do you connect a White Black Green wired device to household White Black Red ground light outlet?
If there is a red wire in the fixture box it sounds like the fixture is three way switched. The travelers are coming from one of the two switches and the cable is going to the second switch.See related links below.
How do you wire 6 recessed fixtures in succession on a 3 way switch?
If you already know how to put one fixture on a 3-way, just connect white-to-white and black-to-black from one light to the next. If you're changing from a single switch to the 3-way, the exact wiring will depend on whether the power comes from the breaker box to the switch or the existing fixture. I'll assume you're starting from scratch or have the power going to the fixture. You need #15 two-wire with ground and #15 three-wire with ground romex. Run two-wire from the breaker box to the first light fixture. Pull a another two-wire from this box to switch A and a three-wire between the switches. String two-wire from the first light to the second, second to third, etc. In the first box, connect white from source to the white fixture wire and the white going to the second box; black from source to the black to switch A; and the black fixture wire to both the white to switch A and the black to the next fixture. At each of the other 5 fixtures, connect all white to white and black to black (three pair in each box except the last one). At switch A, connect the white from the fixture to the common (center) connector and the black directly to the black going to switch B. The red and white wires going to switch B are connected to the two outside connectors of switch A. At switch B, the black goes to the common connector and the red and white to the outside connectors. At each box, connect all the bare wires (second ground) to each other and to the fixture or box. Now turn the power back on. If all the connectors are tight, power should follow the black wires from source past the fixture and switch A to switch B. From there it will go through one or the other of the travellers and, if switch A is in the same position as B, up the white switch leg to the fixtures, turn on all the lights and go back to ground.
How do you install a new pull chain light from a wall outlet?
very easy just pull your self a line from the outlet to the location you want to have the pull light fixture installed ,then connect the black wire to the black wire in the outlet white to the white and the copper ground to the ground then on the other end of the wire at the light fixture location connect the black to the copper screw and the white to the silver screw .and that should make it work with pull string .but make sure the circuit is turned off for that outlet location before you do the instillation
Outside porch lamp has no box just two wires coming in black wires are tied and don't connect to fixture just the white wires what is going on here?
You would have to provide more info to be certain what your problem is. Typically a black and white wire would connect to the two wires on the light fixture. The fixture should also be controlled by a switch that "breaks" the black (Hot Wire) to turn off the fixture. If you have a volt meter you can see if there is 120Volts between the black and white wires with switch on. If there is a single white wire going to fixture (Neutral), where is the "black wires tied" to. Maybe one of the black wires has broken off the fixture.
If there is 4white wires coming out of wall and1red and2black the light fixture has 1ground 1white 1black wire how do you connect it together?
You call an electrician LMAO! Assuming all white wires are connected seperately from the red and black wires and that the other in the box are 110V....Connect your ground to ground, white to white and your black to either the red or black unless they are all tied together in which it wouldn't matter.
You want to install a new light fixture in your bathroom upon removing the old fixture down you discover there is no grounding wire only a black and white wire and GFCI outlet on the circuit?
Just install the new fixture with black to black, white to white, and cap off the ground wire on the new fixture. It'll be fine.
How do you add a switch to a light fixture?
Install the switch in the wall outlet box you have installed. Now run a 12/2 or 14/2 wire from the switch to the light fixture in the ceiling. Run the exact same size wire that is already powering the light. Connect the ground wire coming from the light switch to the ground wires in the ceiling box. At the light in the ceiling cut the black wire powering the light. Cut only that wire. Now strip the 2 black wires back and connect the white wire coming from the wall switch to one of the black wires and the black wire coming from the wall switch to the other black wire. At the wall switch connect the ground wire to the ground screw on the single pole switch. Now connect the white and black wire to either screw. Does not matter which one. Now when you turn the switch off you are breaking the flow of electricity to the light. This is called a switch leg.
