0
Add your answer:
Earn +20 pts
How to wire several lights into one switch?
with your power coming into the switch, you connect the neutral wire (white) to the other white wire that is going to the lights. then the 2 black wires go onto the switch. now that you have the light switched, you just connect the other lights to the first one
How do you wire 3way switch with 2 lights powered at one of the lights?
See sources and related links below. For two lights just parallel the feeds from the first light with a two wire cable to the second light.
How do you wire 2 switches on one circuit?
If your wiring it up for a light switch, then you will need 2 3 way switches, this will allow you to turn on and off lights from 2 locations
How do you wire two 3-way switches to 5 lights?
Wire the two 3 way switches using 3 wire cable (red, black, white and bare). Then connect the first light to the others using two wire cable (black, white and bare) kind of like a daisy chain. The power goes to the first 3 way switch, then switch one goes to switch 2 using the 3 wire cable (even though it has 4 wires in there), then the second switch goes to one of the lights. Hope that helps.
How do I wire one switch to control two lights with the power coming into light?
Using 14/2 or 12/2 wire, black, white and bare. Bring the hot/black wire in the light down to the switch on the black wire, through the switch and back to the light on the white wire. Connect the white wire in the power wire to the white wire in the light. Connect the white power wire from the switch to the black wire in the light. Run the black and white wires in the first light to the second light. You should wrap the white power wire from the switch with black electrical tape to cover the white so that the next person realizes it is a power wire.
How to wire several lights into one switch?
with your power coming into the switch, you connect the neutral wire (white) to the other white wire that is going to the lights. then the 2 black wires go onto the switch. now that you have the light switched, you just connect the other lights to the first one
How do you wire 3way switch with 2 lights powered at one of the lights?
See sources and related links below. For two lights just parallel the feeds from the first light with a two wire cable to the second light.
How do you wire 2 switches on one circuit?
If your wiring it up for a light switch, then you will need 2 3 way switches, this will allow you to turn on and off lights from 2 locations
Where is the 2-wire switch on the brake pedal that opens when depressed and lights the tail lights on a 94 Honda Accord LX Is it under the hard-rubber covering Behind the pedal?
Just follow the brake pedal up until you find a switch that has a little piston coming out of it up againts the pedal arm itself. It may be a 5 wire switch not a 2 wire switch but in any case it the brake light wire that turns on the brake lights will be the wire that changes to hot (12 volt pos) when the peddal is pressed. Hope this helps.
How do you wire two 3-way switches to 5 lights?
Wire the two 3 way switches using 3 wire cable (red, black, white and bare). Then connect the first light to the others using two wire cable (black, white and bare) kind of like a daisy chain. The power goes to the first 3 way switch, then switch one goes to switch 2 using the 3 wire cable (even though it has 4 wires in there), then the second switch goes to one of the lights. Hope that helps.
How do I wire one switch to control two lights with the power coming into light?
Using 14/2 or 12/2 wire, black, white and bare. Bring the hot/black wire in the light down to the switch on the black wire, through the switch and back to the light on the white wire. Connect the white wire in the power wire to the white wire in the light. Connect the white power wire from the switch to the black wire in the light. Run the black and white wires in the first light to the second light. You should wrap the white power wire from the switch with black electrical tape to cover the white so that the next person realizes it is a power wire.
How do you wire a light and switch with the 2 wire old romex?
with a standard 1 pole light switch (one switch operating the light) it is black wire to black wire and white to white (non grounded)
How do you wire a one light to be operated from 4 location?
you will need 2-3way switch and 2-4way switch
How two wire 2 light switch up in 1 box?
Tie all the white wires together under a wire nut and push them back in the box. Tie the black incoming power wire and outgoing power wire, if there is one, together under a wire nut with a black wire pigtail. Connect this pigtail to one screw on each light switch. Connect the black wire going up to the lights to the appropriate switch you wish to use to control that light.
Can you by pass the AC pressure switch?
If it is a 2-wire switch- yes If it is a 3-wire switch- no
How do you wire multiple lights on a 3-way switch with one between and one not?
Explain in more detail what you mean. What is between: the switch or the light? What are you trying to accomplish with this setup? The term 3-way switch means 2 switches controlling one or more lights. If you have 2 lights and one switch then you need a standard 75 cent switch. Generally with 3-way switches, there are 3 wires not including the ground, black, white and red. some houses attach the white to the switch, some attach the black. Generally the white will feed through the box not attaching to anything but another white wire. The black will attach to the upper and lower screws on one side of the switch while the red attaches to the opposite side. The red goes to the other switch and black goes to the light fixture(s).
How do you make a circuit with 3 bulbs 2 switches and and 2 batteries where the 1st switch controls the lighting of all the bulbs and the 2nd switch controls the lighting of the second bulb?
Connect the two batteries for the voltage needed. If they are 12 volt batteries and the lights are 12 volts, connect the batteries in parallel (negative to negative and positive to positive). If they are 12 volt batteries and the lights are 24 volts, connect the batteries in series (negative of one battery to positive of the other). Run a wire from batteries to first switch, then to two of the lights and the other switch (in parallel). From the second switch run a wire to the third light, then connect all three lights back to the battery.
