25.4 mm = 1 in. Divide 30 by 25.4 to solve: 30 ÷ 25.4 = 1.1811 in or just a little bit less than 1-3/16 in.
Direct Conversion Formula
30mm
*
1 in
25.4 mm
=
1.181102362
in
Micrometers come in various sizes. they are normally designed in sizes above one inch to micrometrically count only the last inch in thousands, the usual rule be 25 Thousandths for each full turn of the thimble. thus a 2 inch micrometer can only measure between l and two inches in its gap. Mikes (as they are called) which are sub-calilber, like the famous Marx .50 pocketool- one half inch, and inexpensive) can only measure up to the size indicated- .50 one half inch full, one inch- one inch full- above one inch the gap problem comes in. there has never really been an idea of interchangeable anvils to permit measurements in the gap below. a two inch mike can only measure between l and two inches, and so on. Vernier Calipers do no have this problem and they have electronic readouts also- one can go from zero to six inches without changing instruments. thus it is written in steel. Mauser ( German gun maker) made both micrometers and calipers in their heyday and these were used in the shops.Marx I have already mentioned that ( fifty caliber) was a little jewel.
0.03mm
there are 100 microns per millimeter
There are 25400 microns in one inch. Therefore, rounded to three significant figures, 30 microns is equal to 30/25400 = 0.00118 inches.
30cm = 1113⁄16 inches.
Definitely not 1.8 inches. Try 1.18 inches
2.7
1.5”
2mm is 2000 microns
1000 micrometres (microns) = 1 millimetre.
1 milimeter = 1000 micronsmicron=micrometer
well 1st you firgure out how many inches in 1 mile, then multiply the amount of inches by 30.
30 inches. 1 foot= 12 inches 0.5 a foot (half) = 6 inches 12 x 2= 24+6= 30 inches
30 microns is about 0.001181102 inches.
30in is 762000 microns of vacuum
150 microns is about 0.005905512 inches.
Rounded to three significant figures, 10 microns is equal to 0.000394 inches.
Rounded to three significant figures, 125 microns is equal to 0.00492 inches.
1 millimeter = 1,000 microns
0.0002008 inches, approx.
.004921
There are 25400 microns in one inch. Therefore, rounded to three significant figures, 12 microns is equal to 12/25400 = 0.000472 inches.
3 microns is about 0.00011811 inches.
200 microns is about 0.007874016 inches.
25.4 microns.